
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C15ALJWT is a filter and pressure regulator combined in one body, with no lubricator section. It handles a 1/2in port and delivers a lower pressure band of 0.15-0.4 MPa (20-58 psi) while filtering to 5 um. The metal bowl and automatic drain suit it for lines where condensate is frequent and manual attention is limited.
Its diversion structure spins incoming air to drop liquid water and solid particles into the 60 cc drain bowl before the balanced regulator holds the outlet steady. Weighing 500 g, this single unit replaces a separate filter plus regulator, reducing potential leak points and saving rail space compared to a two-part build. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a small assembly station, where the 5 um element protects fine internals and the lower pressure range suits delicate actuation.
Mount on a wet factory air line feeding a single machine zone; the automatic drain clears condensate without operator rounds, and the metal bowl handles frequent moisture.
Supply a benchtop test fixture requiring a stable 0.15-0.4 MPa output; the integrated filter-regulator saves space and the 5 um element keeps test orifices clean.
Choose this GAFR300C15ALJWT when you need a 1/2in port with a lower 0.15-0.4 MPa (20-58 psi) regulated range, a 5 um element for finer filtration, and an automatic drain for wet or unattended lines. The metal bowl is a build choice for tougher environments; confirm compatibility for aggressive surroundings. No bracket is included (J), and the fitted circular gauge reads MPa/psi on the NPT thread.
If the machine may ever need more than 0.4 MPa, select the standard S type instead. For oil downstream, order the matching GAFC300-15 combination. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
It is a filter & regulator with a 1/2in port, lower pressure range 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 5 um element, automatic drain, metal bowl, 60 cc drain bowl, and 500 g weight.
The L type limits regulation to 0.15-0.4 MPa (20-58 psi) for applications needing gentle, consistent pressure; it is not for high-force work. The J code means no mounting bracket is included, so plan for a panel mount or use an existing bracket.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.