
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR300C15ALNTK is a filter and pressure regulator combined into a single body, so it cleans incoming air and sets a steady outlet pressure without needing separate components. It has a 1/2in port, a 0.15-0.4 MPa (20-58 psi) lower-pressure range, and a 40 um element; the metal bowl and automatic drain handle condensate in the 60 cc drain bowl.
The unit weighs 500 g and its flow curve is plotted to 3500 L/min at 0.7 MPa inlet, which places it in the mid-size class for shop air lines. Because the filter and regulator share one body, there are fewer joints to seal than with a separate filter plus regulator, and the balanced mechanism holds the outlet steady as supply pressure varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a single precision valve or small instrument loop that needs a stable, low regulated pressure from a 1/2in supply line, with the automatic drain handling condensate.
Mount on a machine station where operators set a low pressure once and rely on the self-locking knob to hold it, while the metal bowl and auto drain reduce maintenance visits.
Use in a control panel where space is tight; the single-body design saves rail width compared to separate filter and regulator units, and the included bracket simplifies mounting.
Choose this GAFR300C15ALNTK when you need a 1/2in port with a lower 0.15-0.4 MPa regulated band, a metal bowl, and an automatic drain for unattended operation. The 40 um element is the standard grade; the mounting bracket is included, and the NPT thread has an MPa/psi gauge scale, though no gauge is fitted here - the 1/8in gauge connection is ready if you add one later. The reverse-flow (reflux) valve is fitted as an ordering difference. If your line needs oil downstream, order the matching GAFC300-15 combination instead, since this unit does not lubricate. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The GAFR300C15ALNTK has a 1/2in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The flow curve is plotted to 3500 L/min at 0.7 MPa inlet.
The metal bowl (C) is a build choice for the condensate chamber, and the automatic drain (A) expels collected water without manual intervention, which suits wet or unattended lines. The 40 um element filters solids, and the unit has no lubricator - if you need oil downstream, order the GAFC300-15 combination instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.