
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR300C15ALNWT is a filter and pressure regulator combined into a single body, saving space and reducing potential leak points compared to separate units. It handles a 1/2in port size and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 5 um element for finer filtration.
The metal bowl has a 60 cc capacity and uses an automatic drain to expel condensate. Weighing 500 g, this unit is sized for applications needing clean, regulated air at moderate flow rates, with its flow curve plotted to 3500 L/min at 0.7 MPa inlet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a precise clamping fixture on a small assembly station where a stable, lower pressure is required and fine 5 um filtration protects sensitive pilot valves.
Supply clean, regulated air to a laboratory test bench or analytical instrument that needs a controlled low pressure and protection from particulates.
Power the pneumatic controls on a compact packaging machine, where the automatic drain and metal bowl reduce maintenance in a busy production area.
Choose the GAFR300 body for 1/2in porting and a 60 cc drain bowl, stepping up from the GAFR200's 25 cc bowl if you need longer between drain interventions. This model has a metal bowl, which is a build choice for the environment; confirm compatibility for aggressive surroundings. The automatic drain (A) suits unattended lines, while the 5 um element (W) traps finer particles than the standard 40 um for sensitive equipment. The lower-pressure type (L) tops out at 0.4 MPa, so verify your system never needs more. The mounting bracket is included, and no gauge is fitted, but the 1/8" gauge connection is there if you add one later. For lines needing oil downstream, order the matching GAFC300-15 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g.
The 'L' in the code indicates the lower-pressure type, which is regulated from 0.15 to 0.4 MPa (20-58 psi) instead of the standard 0.15-0.9 MPa. This is for applications that require a consistent, low-pressure supply and where the higher ceiling is not needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.