
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C15ALNWTK is a filter and pressure regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. This model uses a 1/2in port, a metal bowl, and a 5 um element to trap fine particles for cleaner downstream air.
It operates in the lower pressure band of 0.15-0.4 MPa (20-58 psi), with a maximum supply of 1.0 MPa (145 psi). The automatic drain clears condensate without manual intervention, and the included mounting bracket simplifies installation on a frame or panel. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a 5 um filtered, regulated air supply to a precision clamping fixture on a machining center, where consistent low pressure prevents part distortion.
Provide clean, low-pressure air to a laboratory pneumatic actuator or valve manifold, where fine filtration protects sensitive components.
Supply a stable 0.3 MPa signal to pneumatic sensors on a packaging line, with the automatic drain handling condensate in humid conditions.
Choose the GAFR300 body for 1/2in porting with a 60 cc drain bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet. The metal bowl (C) suits demanding environments, while the 5 um element (W) captures finer particles than the standard 40 um, though it will require more frequent service. The automatic drain (A) is ideal for unattended operation, and the included bracket (blank) mounts directly to a frame. The lower pressure type (L) is selected for applications needing only up to 0.4 MPa; if more pressure is ever required, this is the wrong part. No gauge is fitted (N), so the 1/8in gauge connection is available for adding one. The reflux valve (K) is included as an ordering option. For lines needing lubrication downstream, order the matching GAFC300-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a 60 cc metal drain bowl, and weighs 500 g. The pressure range is 0.15-0.4 MPa (20-58 psi), with a max supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and uses a 5 um element.
The 'L' code designates the lower-pressure type, which regulates from 0.15 to 0.4 MPa instead of the standard 0.15-0.9 MPa. This is for applications that require a precise, low-pressure output and do not need higher pressures.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.