
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C15ALWT is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This 1/2in unit uses a 5 um element to trap fine particles, and its metal bowl collects condensate and solids.
Its lower-pressure regulator works from 0.15 to 0.4 MPa (20-58 psi), with a maximum supply of 1.0 MPa (145 psi). The automatic drain clears the 60 cc bowl without manual attention, making it suitable for lines where regular maintenance is inconvenient. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
The 5 um element protects sensitive pneumatic valves from fine contamination, while the lower-pressure range suits circuits that operate below 0.4 MPa.
A 1/2in port feeds a single station or a small machine header, and the automatic drain keeps the 60 cc bowl from flooding on lines with high condensate.
The included bracket secures the 500 g unit to a panel, and the circular gauge with magnifier lets operators read the set pressure at a glance.
Choose the GAFR300 body when you need a 1/2in port and a 500 g unit that mounts on a panel or frame rather than hanging from tubing. The metal bowl is a build choice with the same 1.0 MPa maximum and -5 to 70 C range as PC or nylon, so confirm compatibility for aggressive surroundings. This model has the automatic drain, the 5 um element, and the gauge fitted with an MPa/psi scale; the mounting bracket is included. If your line needs oil downstream, order the matching GAFC300-15 combination instead, since this unit does not lubricate. With a 1.0 MPa max supply, there is about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The working pressure range is 0.15-0.4 MPa (20-58 psi), with a maximum supply pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc, the unit weighs 500 g, and the filter element is rated at 5 um.
The automatic drain expels condensate from the 60 cc bowl without manual intervention, which is useful for unattended operation or lines with high moisture. Models without the A code ship with both semi-auto and manual drains.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.