
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C15ALWTK is a filter and pressure regulator combined in a single body, so it cleans incoming air and holds a steady outlet pressure without needing a separate filter plus regulator pair. This 1/2in version uses a 5 um element to catch fine particles, and its metal bowl suits demanding shop environments.
Its lower-pressure type regulates from 0.15 to 0.4 MPa (20-58 psi), with a 60 cc condensate bowl and a 500 g mass that signal a mid-size unit. The automatic drain clears water without manual attention, and the fitted circular gauge shows the set pressure on an MPa/psi scale. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that need clean, regulated air at a stable lower pressure. The 5 um element protects fine internal passages from particle wear.
Supply a single machining fixture or a small automated station where 1/2in piping is standard. The automatic drain keeps the bowl from filling during long production runs.
Protect sensitive instruments or gauges from water and solids. The diversion filter spins out liquid, while the lower pressure range suits delicate sensing circuits.
Choose the GAFR300 body when your line needs 1/2in ports and a 3500 L/min flow envelope at 0.7 MPa inlet; step up to a GAFR400 for 7000 L/min at 0.7 MPa inlet if the machine grows. The metal bowl is a build choice, not a performance upgrade, so confirm compatibility with any aggressive fluids in your area. This model has an automatic drain, a 5 um element for finer filtration, and the reverse-flow (reflux) valve fitted as an ordering difference. The included bracket simplifies mounting, and the NPT thread pairs with the MPa/psi gauge scale. If you need lubrication downstream, order the matching GAFC300-15 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a 0.15-0.4 MPa (20-58 psi) working range, a 1.0 MPa (145 psi) maximum pressure, and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, holds 60 cc in the drain bowl, and weighs 500 g.
The metal bowl is a material choice for the condensate chamber, while the 5 um element traps finer particles than the standard 40 um version. Both suit applications needing cleaner air, but the finer element will require more frequent service.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.