
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ASNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR300C15ASNWTK is a filter and regulator combined into one body, so it cleans incoming air and sets a steady outlet pressure without needing a separate filter plus regulator pair. It has a 1/2in port, a 5 um element, and a working range of 0.15-0.9 MPa (20-130 psi), with a metal bowl and an automatic drain.
The unit weighs 500 g and its flow curve is plotted to 3500 L/min at 0.7 MPa inlet, which helps size it for a small machine header. Because the filter and regulator share one body, there are fewer joints to seal and less rail space is consumed than with two separate components. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ASNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that need clean, regulated air at a steady pressure. The 5 um element removes fine particles that could clog small orifices, while the balanced regulator holds the setpoint as line pressure varies.
Supply a single machine tool with filtered, regulated air through a 1/2in line. The automatic drain clears condensate without operator attention, and the metal bowl suits a fixed installation where the 500 g unit is mounted on a frame or panel.
Provide a stable air source for a test bench that cycles actuators or checks components. The self-locking knob resists drift from vibration, keeping the outlet pressure where you set it during a long test sequence.
Choose the GAFR300 body when you need a 1/2in port and a 60 cc drain bowl; it sits between the GAFR200 (25 cc bowl, 2000 L/min envelope) and the GAFR400 (100 cc bowl, 7000 L/min envelope). The metal bowl (C) is a build choice, and the automatic drain (A) suits unattended lines, while the 5 um element (W) traps finer particles for sensitive equipment. This model includes the mounting bracket, has no gauge (the 1/8in connection is ready for one), and uses NPT threads with the reverse-flow valve (K) fitted as an ordering difference. If oil is needed downstream, order the matching GAFC300-15 combination instead. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The GAFR300C15ASNWTK has a 1/2in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The unit has a 5 um element and an automatic drain.
The K code indicates the reverse-flow (reflux) valve is fitted. This is an ordering difference from models without the K code. The catalogue does not detail its function in our data, so treat it as a specified option for this part.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.