
The AirTAC GAFR Adjustable Filter Regulator GAFR40010ALNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR40010ALNWTK is a filter & regulator that combines a diversion-type air filter and a balanced pressure regulator in a single body, so it conditions the air supply without needing a separate filter and regulator pair. This 3/8in model operates in the lower 0.15-0.4 MPa (20-58 psi) range and uses a 5 um element to trap fine particles, while its 100 cc condensate bowl collects the water and solids spun out of the airstream.
With an automatic drain and a reverse-flow (reflux) valve fitted, this unit is built for continuous, low-maintenance operation in a compact footprint. The 880 g body includes a mounting bracket, and the 1/4in gauge connection is ready if a pressure gauge is added later to monitor the set pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR40010ALNWTK |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR400 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 3/8" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-10 (F.R.L. combination) |
Set a stable 0.3 MPa supply for a precision pneumatic valve or a sensitive control loop, with the 5 um element protecting the internals from fine wear particles.
Feed a single 3/8in actuator station on a small assembly machine, using the automatic drain to handle condensate without interrupting production.
Protect a laboratory instrument or a test rig that needs clean, regulated air at a low pressure, with the 5 um element and the lower pressure range matching the requirement.
Choose the GAFR40010ALNWTK when you need a 3/8in filter & regulator with a lower pressure ceiling and fine filtration. The automatic drain (A) handles condensate without manual attention, while the 5 um element (W) suits precision applications; the included bracket simplifies mounting, and the reverse-flow valve (K) is an ordering difference to note. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If the line needs lubrication downstream, order the matching GAFC400-10 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-10 combination; do not expect an oil mist from this unit.
The GAFR40010ALNWTK is a filter & regulator with a 3/8in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C (must not freeze), has a 100 cc drain bowl, and weighs 880 g. The unit has a 5 um element, an automatic drain, and a PC bowl.
The automatic drain automatically expels accumulated condensate from the 100 cc bowl without manual intervention, making it suitable for unattended operation or wet air lines. This model has the automatic drain option, so you do not need to manually open a drain valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.