verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR400 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR40010ALT

The AirTAC GAFR Adjustable Filter Regulator GAFR40010ALT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight880 g
$68.92 $76.42Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR400-10 bowl, gauge and thread option on one page All GAFR400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR40010ALT

The GAFR40010ALT is a filter and regulator combined into a single body, handling both air preparation steps without the need for separate units. This model uses a 3/8in port, operates in the lower pressure band of 0.15-0.4 MPa (20-58 psi), and comes with a 40 um element.

Its 100 cc condensate bowl and 880 g mass place it in the mid-range size class, suitable for machine headers where space is at a premium. The automatic drain clears collected water without manual intervention, and the integrated circular gauge shows the set pressure on an MPa/psi scale. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR40010ALT Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR40010ALT
SeriesGAFR400 filter & regulator
Port size3/8" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
BracketIncluded
Weight880 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR40010ALT

GAFR400GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Mounting bracket included.
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-10 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR400 · 3/8" · curve to 7000 L/min
One size downGAFR300
One size upGAFR500 (curve to 8000 L/min)
Add a lubricatorGAFC400-10 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR40010ALT Is Used

precision_manufacturing

Precision Fixturing

Feed a clamping fixture on a CNC machine with a stable 0.3 MPa supply, using the lower pressure range to avoid over-clamping delicate workpieces.

factory

Machine Header Supply

Provide filtered, regulated air to a single station on an assembly line, where the 3/8in port matches typical manifold inlets and the automatic drain reduces maintenance.

science

Lab Air Bench

Supply a laboratory pneumatic bench where a maximum of 0.4 MPa protects experimental setups, with the 40 um element trapping particles from the main line.

Is the Airtac GAFR Adjustable Filter Regulator GAFR40010ALT the Right Air-Prep Unit?

Choose the GAFR40010ALT when your circuit needs a regulated output capped at 0.4 MPa, such as for delicate air tools or sensitive actuators. The 3/8in port suits branch lines feeding a single machine station, while the 100 cc bowl holds more condensate than the 60 cc unit on a GAFR300, meaning less frequent draining. The automatic drain (A) handles wet supply lines without operator attention, and the included bracket simplifies panel mounting. The standard 40 um element covers general shop air; select a W variant for 5 um filtration if you have precision valves downstream. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 880 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-10 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR40010ALT FAQ

The GAFR40010ALT is a filter & regulator with a 3/8in port, working pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum supply pressure of 1.0 MPa (145 psi). It has a proof pressure of 1.5 MPa (215 psi), operates from -5 to 70 C, and includes a 40 um element. The condensate bowl holds 100 cc and the unit weighs 880 g.

The 'L' in the code designates the lower-pressure type, which tops out at 0.4 MPa instead of the standard 0.9 MPa. This is chosen when downstream equipment requires a limited pressure ceiling for safety or precision. If your application might need more than 0.4 MPa, you would need a standard 'S' type model instead.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR40010ALT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR40010ALT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.