
The AirTAC GAFR Adjustable Filter Regulator GAFR40010LWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR40010LWT is a filter and regulator combined into one body, so the incoming air is cleaned and then set to a steady pressure without needing separate parts. This unit has a 3/8in port, works in the lower 0.15-0.4 MPa (20-58 psi) range, and uses a 5 um element to trap fine particles.
Its 100 cc condensate bowl collects the water and solids spun out by the diversion structure, and the 880 g mass shows this is a substantial mid-size unit that needs a proper mount. The circular gauge with MPa/psi scale is fitted, and the mounting bracket is included in the box. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR40010LWT |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 3/8" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-10 (F.R.L. combination) |
Feed a 5 um filtered, regulated supply to a pneumatic fixture that holds tight tolerances, where the lower pressure range protects delicate components.
Provide a stable, filtered air source for a laboratory setup that requires a gentle, controlled pressure below 0.4 MPa for experiments or testing.
Supply a compact automation cell with one or two actuators, where the 3/8in port and 100 cc bowl are sized for moderate air consumption.
Choose this GAFR400 body when a 3/8in port and a 100 cc drain bowl match the air demand of your station. The 5 um element suits precision valves or instrument lines, though it will need service more often than a 40 um element. The lower-pressure L type tops out at 0.4 MPa, so confirm your machine never needs more than that. The semi-auto and manual drains are both fitted, the PC bowl is the standard build, and the bracket is included. If oil is needed downstream, order the matching GAFC400-10 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-10 combination; do not expect an oil mist from this unit.
The GAFR40010LWT is a filter & regulator with a 3/8in port. Its working pressure range is 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 100 cc drain bowl and weighs 880 g.
The 'L' in the code means lower-pressure type, with a maximum regulated output of 0.4 MPa instead of the standard 0.9 MPa. This is for applications that need a gentle, precise pressure and never require more. If your machine might need more pressure later, the standard 'S' type would be the safer choice.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.