verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR400 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT

The AirTAC GAFR Adjustable Filter Regulator GAFR40015ALJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight880 g
$62.38 $69.88Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR400-15 bowl, gauge and thread option on one page All GAFR400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT

The GAFR40015ALJNT is a filter and regulator combined into a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate units. This 1/2in version has no gauge fitted, leaving a 1/4in connection ready if you add one later.

Its lower-pressure type regulates from 0.15 to 0.4 MPa (20-58 psi), with a 40 um element and an automatic drain. The 100 cc condensate bowl collects water and solids separated by the internal diversion structure, and the 880 g mass signals a unit that needs proper panel mounting rather than tubing support. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR40015ALJNT
SeriesGAFR400 filter & regulator
Port size1/2" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
BracketNot included (J)
Weight880 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR400 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT

GAFR400GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
JNo bracket (J) — supplied without the mounting bracket.
NNo pressure gauge; 1/4" gauge connection.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR400 · 1/2" · curve to 7000 L/min
One size downGAFR300
One size upGAFR500 (curve to 8000 L/min)
Add a lubricatorGAFC400-15 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT Is Used

precision_manufacturing

Precision valve control

Feed a bank of precision pneumatic valves that require a stable, lower pressure supply. The balanced regulator holds the setpoint as line pressure varies, and the 40 um element protects sensitive internals from particle wear.

factory

Machine tool coolant lines

Supply a machine tool's air-operated coolant pump with filtered air at a controlled lower pressure. The automatic drain clears condensate continuously, reducing maintenance stops on a busy production floor.

engineering

Test bench air supply

Provide a consistent 0.15-0.4 MPa source for pneumatic test fixtures and calibration rigs. The single-body design saves rail space, and the 1/2in port supports moderate flow to multiple test points.

Is the Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT the Right Air-Prep Unit?

Choose the GAFR400 body when you need 1/2in ports and a 100 cc drain bowl, stepping down from the GAFR500's 108 cc bowl if space is tighter. The PC bowl suits standard shop air, while the automatic drain handles wet lines without manual attention. The L type caps at 0.4 MPa, so verify your supply never needs more; the J code means no bracket is included, and the N code means no gauge ships with it. If your line needs oil downstream, order the GAFC400-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa above the 0.4 MPa top of the range.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 880 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT FAQ

It regulates air from 0.15 to 0.4 MPa (20-58 psi), with a maximum supply pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Operating temperature is -5 to 70 C, the drain bowl holds 100 cc, and the unit weighs 880 g.

The N code means no gauge is supplied, leaving a 1/4in gauge connection for adding one later. The J code means the mounting bracket is omitted, so you can use an existing bracket or panel-mount the unit. Both codes reduce cost when those accessories are not needed.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR40015ALJNT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR40015ALJNT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.