verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR400 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT

The AirTAC GAFR Adjustable Filter Regulator GAFR40015ALNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight880 g
$63.49 $70.99Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR400-15 bowl, gauge and thread option on one page All GAFR400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT

The GAFR40015ALNWT is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate units. This model uses a 1/2in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element that traps finer particles for sensitive equipment.

Its 100 cc condensate bowl and automatic drain mean it can handle wet lines without manual attention, while the included mounting bracket supports its 880 g mass. The balanced regulator holds the set pressure as supply varies, and the self-locking knob resists drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR40015ALNWT
SeriesGAFR400 filter & regulator
Port size1/2" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
BracketIncluded
Weight880 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR400 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT

GAFR400GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Mounting bracket included.
NNo pressure gauge; 1/4" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR400 · 1/2" · curve to 7000 L/min
One size downGAFR300
One size upGAFR500 (curve to 8000 L/min)
Add a lubricatorGAFC400-15 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT Is Used

precision_manufacturing

Precision valve control

Feed a bank of precision pneumatic valves that need clean, regulated air at a consistent lower pressure, with the 5 um element protecting internal orifices.

factory

Wet utility lines

Mount on a machine header fed by a wet plant line; the automatic drain clears condensate without operator rounds, and the 100 cc bowl handles the load.

engineering

Test rigs and benches

Supply a test fixture that requires a stable 0.15-0.4 MPa output, with the included bracket securing the 880 g unit to a panel or frame.

Is the Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT the Right Air-Prep Unit?

Choose this GAFR400 body when you need 1/2in ports and a 100 cc drain bowl, which holds about 1.7x the condensate of a GAFR300's 60 cc bowl. The L-type pressure range tops out at 0.4 MPa (20-58 psi), so confirm your system never needs more than that; the 5 um element suits precision valves but will need more frequent service than a 40 um unit. The automatic drain handles unattended operation, the bracket is included, and no gauge is fitted, so the 1/4in gauge connection is ready if you add one later. If the line needs oil downstream, order the matching GAFC400-15 combination instead. Max supply 1.0 MPa leaves about 0.6 MPa above the 0.4 MPa top of the range.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 880 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT FAQ

Pressure range is 0.15-0.4 MPa (20-58 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The drain bowl holds 100 cc, the unit weighs 880 g, and the gauge connection is 1/4in.

The N code after the port means no gauge is supplied, so you cannot read the set pressure without adding one. The gauge connection on the GAFR400 body is 1/4in, ready for a standard AirTAC gauge if you need to monitor output.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR40015ALNWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR40015ALNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.