
The AirTAC GAFR Adjustable Filter Regulator GAFR40015SWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR40015SWTK is a filter and regulator combined into one 880 g body with a 1/2in port, replacing a separate filter plus regulator with fewer joints to seal. It spins incoming air to separate liquid water and trap solid particles, then delivers a steady outlet pressure within 0.15-0.9 MPa (20-130 psi) using a balanced, self-locking regulator that resists drift from vibration.
This model ships with a 5 um element for finer filtration, a 100 cc condensate bowl, and both semi-auto and manual drains fitted. The circular gauge with MPa/psi scale is included, and the mounting bracket is part of the package. A reverse-flow (reflux) valve is fitted as an ordering difference, and the unit operates from -5 to 70 C with a 1.0 MPa (145 psi) maximum pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR40015SWTK |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 1/2" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a machining center where the 5 um element protects fine internal orifices from particulate wear, while the balanced regulator keeps outlet pressure stable as shop supply fluctuates.
Mount this 1/2in unit on a lathe or milling machine header to supply a consistent 0.15-0.9 MPa to cylinders and actuators, with the 100 cc bowl handling condensate from a moderately wet line.
Use on an assembly bench feeding multiple hand tools and small actuators where the included bracket secures the 880 g body to a frame, and the semi-auto drain clears water without manual attention.
Choose the GAFR400 body when you need a 1/2in port and the 100 cc drain bowl that holds about 1.7x the condensate of the GAFR300's 60 cc bowl, meaning fewer drain interventions on a busy line. The PC bowl suits general shop air, while the 5 um element traps finer particles for sensitive valves or instruments, though it will need more frequent service than a 40 um unit. The semi-auto plus manual drain gives you both automatic dumping and a manual override, and the included bracket simplifies panel mounting. The NPT thread carries the MPa/psi gauge scale, and the reflux valve is fitted per the K code. If your line needs oil downstream, order the matching GAFC400-15 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.
The GAFR40015SWTK is a filter and regulator with a 1/2in port, working range 0.15-0.9 MPa (20-130 psi), maximum pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), and temperature range -5 to 70 C. It has a 100 cc condensate bowl, weighs 880 g, uses a 5 um element, and includes a circular gauge with MPa/psi scale.
The K indicates a reverse-flow (reflux) valve is fitted to the GAFR40015SWTK. It is an ordering difference shown as a separate pneumatic symbol. The catalogue does not detail its function in our data, so confirm the operating behavior from the full AirTAC documentation if you need that information.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.