
The AirTAC GAFR Adjustable Filter Regulator GAFR400C10ALNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR400C10ALNT is a genuine AirTAC filter and regulator combined into one body, with no lubricator section. It spins incoming air to separate liquid water and solid particles, then delivers a steady outlet pressure through a balanced regulator mechanism. This model uses a 3/8in port, a 100 cc metal condensate bowl, and a 40 um filter element.
Its lower-pressure type regulates from 0.15 to 0.4 MPa (20-58 psi), making it suitable for gentle or sensitive applications. The pressed-in self-locking knob resists drift from vibration, helping maintain the set pressure. At 880 g, this unit needs proper panel or frame mounting rather than support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR400C10ALNT |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR400 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 3/8" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-10 (F.R.L. combination) |
Use the lower-pressure range to set a delicate 0.3 MPa supply for a small pneumatic clamp or a sensitive test fixture, where a standard regulator might deliver too much force.
The automatic drain removes condensate without manual checks, making this unit a fit for a compressor room or a humid plant area where water accumulates quickly in the 100 cc bowl.
Mount this 880 g filter-regulator on a machine frame or control panel using the included bracket, feeding a single 3/8in line to a local actuator or a small valve manifold.
Choose the GAFR400 body for a 3/8in port with a 100 cc drain bowl and a flow curve plotted to 7000 L/min at 0.7 MPa inlet. The metal bowl (C) suits demanding environments; confirm compatibility for aggressive surroundings. The automatic drain (A) handles wet or unattended lines, while the included bracket simplifies mounting. The L type tops out at 0.4 MPa, so verify your supply stays within this band. No gauge is fitted, but the 1/4in gauge connection allows adding one later. The 40 um element handles standard shop air; the W option upgrades to 5 um. NPT threads pair with an MPa/psi gauge scale. If oil is needed downstream, order the matching GAFC400-10 combination instead. A 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-10 combination; do not expect an oil mist from this unit.
This is a filter and regulator in one body. The pressure range is 0.15-0.4 MPa (20-58 psi), with a maximum supply of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 100 cc, and the unit weighs 880 g. It has a 3/8in port, a 40 um element, and an automatic drain.
The L code sets the regulated range to 0.15-0.4 MPa, which is about 44% of the standard type's ceiling, for applications that need gentle pressure. The N code means no gauge is supplied; the 1/4in gauge connection is there if you add one later. This model also has a metal bowl and an automatic drain.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.