
The AirTAC GAFR Adjustable Filter Regulator GAFR400C10ST is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR400C10ST is a filter and regulator combined into one body, saving rail space and reducing potential leak points compared to separate units. It handles a 3/8" port with a 40 um element and a metal bowl, rated for 0.15-0.9 MPa (20-130 psi).
The diversion structure spins incoming air to separate liquid water and solid particles into the 100 cc drain bowl, while the balanced regulator maintains a steady outlet pressure. Weighing 880 g, this unit is built for a proper panel mount, not for support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR400C10ST |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 3/8" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-10 (F.R.L. combination) |
Feed a clean, regulated air supply to a precision vise or a small indexing table on a CNC machine, where consistent pressure is critical.
Supply filtered air to pneumatic screwdrivers or nutrunners on an assembly line, protecting the tools from moisture and particulates.
Use in a laboratory test fixture that needs a stable, filtered air source for actuating a cylinder or a pressure sensor.
Choose the GAFR400C10ST for a 3/8" line needing both filtration and pressure control in a single compact body. The metal bowl suits demanding environments, and the included bracket simplifies mounting. This model comes with a semi-auto drain plus a manual drain option, a fitted gauge reading MPa/psi, and a standard 0.15-0.9 MPa adjustment range. For finer filtration, select the W option for a 5 um element. If you need lubrication downstream, order the matching GAFC400-10 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-10 combination; do not expect an oil mist from this unit.
The GAFR400C10ST is a filter & regulator with a 3/8" port, a 100 cc metal drain bowl, and a weight of 880 g. Its pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The operating temperature range is -5 to 70 C.
The 'C' code specifies a metal bowl for the condensate drain. This is a build choice for the environment; the pressure and temperature ratings are the same as the PC or nylon options. Confirm compatibility with any aggressive chemicals or solvents you may have.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.