
The AirTAC GAFR Adjustable Filter Regulator GAFR400C15ASWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR400C15ASWT is a filter & regulator with the filter and the regulator in one body, so it replaces a separate GAF filter plus a GAR regulator and removes one set of pipe joints. It uses a diversion structure to spin the air, dropping liquid water and solid particles into the 100 cc metal bowl, then a balanced, self-locking regulator holds the outlet steady as supply pressure varies.
This model has a 1/2in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi), and a 5 um element that traps finer particles for precision valves or instrument air. The 880 g body is a mid-size unit that needs a proper panel or frame mount rather than support from the tubing, and the automatic drain clears condensate without manual attention. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR400C15ASWT |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 1/2" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-15 (F.R.L. combination) |
Feed a single machining station or a small assembly cell with clean, regulated air at a steady pressure, with the 5 um element protecting sensitive valves and the automatic drain handling condensate.
Supply a bench test rig or instrument air line where the 1/2in port supports moderate flow and the 5 um filter keeps fine particles away from orifices and gauges.
Prepare air for a short production line with several actuators, using the 100 cc bowl to reduce drain checks and the balanced regulator to hold set pressure as line demand varies.
Choose the body and port first: the GAFR400 with a 1/2in port suits a machine station or small header, while the GAFR300 below it is plotted to 3500 L/min at 0.7 MPa inlet and the GAFR500 above it to 8000 L/min. The metal bowl is a build choice for the environment, and the 5 um element trades finer filtration for more frequent service. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If the line needs oil downstream, order the matching GAFC400-15 combination instead, since this unit does not lubricate. Max supply 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan a supply near 1.0 MPa if you need 0.9 MPa out.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.
The GAFR400C15ASWT is a filter & regulator with a 1/2in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 100 cc and the unit weighs 880 g.
The W code specifies a 5 um filter element instead of the standard 40 um. This traps far finer particles, which suits precision valves or instrument air, but the finer element will load up faster and need more frequent service or replacement than a 40 um element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.