verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR400 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK

The AirTAC GAFR Adjustable Filter Regulator GAFR400C15LJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialMetal
  • Drainsemi-auto + manual
  • Pressure gaugeNot fitted
  • Weight880 g
$71.09 $78.59Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR400-15 bowl, gauge and thread option on one page All GAFR400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK

The GAFR400C15LJNTK is a filter and regulator combined into a single body, eliminating the need for separate GAF filter and GAR regulator units. This 1/2in port model weighs 880 g and filters incoming air to 40 um while regulating outlet pressure from 0.15 to 0.4 MPa (20-58 psi).

Its metal bowl collects condensate and solids separated by the diversion structure, holding up to 100 cc before draining. The unit comes without a gauge, so the 1/4in gauge connection remains available for adding one later. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK
SeriesGAFR400 filter & regulator
Port size1/2" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialMetal
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
BracketNot included (J)
Weight880 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR400 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK

GAFR400GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
JNo bracket (J) — supplied without the mounting bracket.
NNo pressure gauge; 1/4" gauge connection.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR400 · 1/2" · curve to 7000 L/min
One size downGAFR300
One size upGAFR500 (curve to 8000 L/min)
Add a lubricatorGAFC400-15 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK Is Used

precision_manufacturing

Precision pressure setting

Set a stable 0.3 MPa supply for a precision pneumatic vise or a delicate assembly fixture that must not see higher pressure.

factory

Machine tool coolant lines

Feed a 1/2in header serving coolant valves and small cylinders where a lower pressure limit protects downstream components.

engineering

Test bench air supply

Provide filtered air at a controlled low pressure for leak testing or calibration setups that require a gentle, consistent flow.

Is the Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK the Right Air-Prep Unit?

Choose this GAFR400 for 1/2in piping where a lower regulated pressure band of 0.15-0.4 MPa (20-58 psi) is sufficient. The metal bowl suits demanding environments, while the semi-auto and manual drains require periodic attention. No bracket is included, so plan for panel mounting or an existing support. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The reverse-flow valve is fitted as an ordering option. If lubrication is needed downstream, order the matching GAFC400-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 880 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK FAQ

It operates from 0.15 to 0.4 MPa (20-58 psi) with a maximum supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The metal drain bowl holds 100 cc and the unit weighs 880 g.

The N code after the port means no gauge is supplied; the 1/4in gauge connection is there if you add one later. The J code means the mounting bracket is omitted, so you must use an existing bracket or panel mount.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR400C15LJNTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR400C15LJNTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.