
The AirTAC GAFR Adjustable Filter Regulator GAFR400N15SNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR400N15SNWTK is a filter and regulator combined in a single body, so it cleans incoming air and locks outlet pressure without needing separate parts. This 1/2in unit weighs 880 g and uses a nylon condensate bowl, with a 5 um element that traps finer particles than the standard 40 um grade. It operates from 0.15 to 0.9 MPa (20-130 psi) and includes both semi-auto and manual drains for flexible servicing.
Because the filter and regulator share one housing, there are fewer joints to seal and less rail width compared to a separate GAF filter plus GAR regulator. The balanced mechanism holds the set pressure steady as supply varies, and the pressed-in self-locking knob resists drift from vibration. A reverse-flow (reflux) valve is fitted as an ordering difference, and the gauge connection is 1/4in if you add one later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR400N15SNWTK |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR400 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 1/2" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a 1/2in header, where the 5 um element protects fine orifices from particle wear and the balanced regulator keeps outlet pressure stable.
Supply a multi-station machine tool line with clean, regulated air at up to 0.9 MPa, using the 100 cc bowl to handle condensate between scheduled drain checks.
Mount on a test bench or instrument air skid where the 880 g body needs a proper frame bracket, and the 5 um element supports sensitive measurement equipment.
Choose this GAFR400 body for 1/2in lines that need up to 7000 L/min plotted flow at 0.7 MPa inlet, stepping up from the GAFR300's 3500 L/min envelope. The nylon bowl suits environments where you prefer a non-metal build, while the 5 um element handles precision valves or instrument air but requires more frequent service than 40 um. The semi-auto plus manual drain lets you empty the 100 cc bowl on schedule or automatically when pressure drops, and the included bracket simplifies mounting. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For lines needing oil downstream, order the matching GAFC400-15 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.
Working pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C and must not freeze. The drain bowl holds 100 cc and the unit weighs 880 g. It uses a 5 um element and has a 1/2in port with NPT thread.
The GAFR400N15SNWTK combines both filtering and pressure regulation in one body, so it replaces a separate GAF filter plus GAR regulator. It does not add lubrication, so if you need oil downstream, order the matching GAFC400-15 combination which includes a lubricator.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.