
The AirTAC GAFR Adjustable Filter Regulator GAFR500C20ALWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR500C20ALWT is a filter and pressure regulator combined in a single body, saving rail space and reducing potential leak points compared to separate units. It handles 3/4in ports and weighs 950 g, placing it in the mid-large size class for machine headers.
This lower-pressure version regulates from 0.15 to 0.4 MPa (20-58 psi) and includes a 5 um element for finer filtration. The metal bowl and automatic drain suit continuous operation, while the fitted gauge shows MPa/psi on the NPT thread scale.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR500C20ALWT |
|---|---|
| Series | GAFR500 filter & regulator |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Bracket | Included |
| Weight | 950 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR500 | GA500 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC500-20 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR500 · 3/4" · curve to 8000 L/min |
|---|---|
| One size down | GAFR400 |
| One size up | GAFR600 (curve to 12000 L/min) |
| Add a lubricator | GAFC500-20 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that require a stable, lower regulated pressure. The 5 um element protects sensitive internals from fine particulates.
Mount on a machine header supplying multiple actuators. The automatic drain and 108 cc metal bowl handle condensate without frequent manual checks.
Use in an instrument air panel where a consistent 0.15-0.4 MPa supply is needed. The included gauge allows operators to verify set pressure at a glance.
Choose this GAFR500 for lines needing a 3/4in port and a 950 g body that demands proper panel mounting. The metal bowl (C) is a build choice for the environment, and the automatic drain (A) handles unattended or wet lines without manual intervention. The 5 um element (W) traps finer particles than the standard 40 um, though it will need more frequent service. The included bracket and gauge are fitted; the L type caps at 0.4 MPa, so confirm your system never needs more. If oil is required downstream, order the matching GAFC500-20 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa above the 0.4 MPa top of the range, giving ample inlet margin for stable regulation.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC500-20 combination; do not expect an oil mist from this unit.
The GAFR500C20ALWT is a filter & regulator with a 3/4in port, working pressure range of 0.15-0.4 MPa (20-58 psi), max pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 108 cc drain bowl, and weighs 950 g.
The L type is designed for applications that only need up to 0.4 MPa, offering finer control in that band. The 5 um element (W) filters much finer particles than the standard 40 um, which is critical for precision valves or instrument air, though it requires more frequent replacement.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.