
The AirTAC GAFR Adjustable Filter Regulator GAFR500N20ASNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR500N20ASNWT is a filter and regulator combined into a single body, handling both filtration and pressure control in one compact unit. With a 3/4in port and a 950 g mass, this body size is built for substantial machine headers or multi-station lines, not for being supported by tubing alone.
This model operates in the standard 0.15-0.9 MPa (20-130 psi) range and comes with a 5 um element for finer particle removal. The nylon bowl and automatic drain mean it is ready for wet or unattended lines, and the 108 cc condensate bowl sets the service interval for draining. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR500N20ASNWT |
|---|---|
| Series | GAFR500 filter & regulator |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Bracket | Included |
| Weight | 950 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR500 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR500 | GA500 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC500-20 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR500 · 3/4" · curve to 8000 L/min |
|---|---|
| One size down | GAFR400 |
| One size up | GAFR600 (curve to 12000 L/min) |
| Add a lubricator | GAFC500-20 (F.R.L. combination) |
Feed a multi-station assembly machine header with filtered, regulated air at 3/4in port size, handling the flow needs of several actuators from one point.
Use the 5 um element ahead of precision valves or sensors that need finer particle removal, while the regulator keeps the set pressure steady.
Stabilize air pressure for a long conveyor system with multiple pneumatic stops, where the automatic drain reduces maintenance on wet supply lines.
Choose the GAFR500 body when you need a 3/4in port and a flow envelope plotted to 8000 L/min at 0.7 MPa inlet, which is a step up from the GAFR400's 7000 L/min envelope. The nylon bowl is a build choice, and the automatic drain suits lines where manual draining is impractical. The 5 um element traps finer particles than the standard 40 um, though it will need more frequent service. The mounting bracket is included, and the NPT thread gives a MPa/psi gauge scale; no gauge is fitted, but the 1/4in gauge connection is ready for one. If oil is needed downstream, order the matching GAFC500-20 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC500-20 combination; do not expect an oil mist from this unit.
The GAFR500N20ASNWT is a filter & regulator with a 3/4in port, working pressure 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), and temperature range -5 to 70 C. It has a 108 cc drain bowl and weighs 950 g, with a 5 um element and automatic drain.
The N code after the port means no gauge is supplied. The GAFR500 body has a 1/4in gauge connection, so you can add a compatible gauge later if you need to read the set pressure directly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.