
The AirTAC GAFR Adjustable Filter Regulator GAFR500N20ASNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR500N20ASNWTK is a genuine AirTAC filter & regulator, combining both functions in a single body to save space and reduce potential leak points. This 3/4in unit handles air flows plotted to 8000 L/min at 0.7 MPa inlet, with a 5 um element for fine filtration.
This model operates in the standard 0.15-0.9 MPa (20-130 psi) range and features a nylon bowl with an automatic drain. The 950 g weight and 108 cc condensate bowl indicate a substantial unit that needs proper mounting, not support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR500N20ASNWTK |
|---|---|
| Series | GAFR500 filter & regulator |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Bracket | Included |
| Weight | 950 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR500 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR500 | GA500 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC500-20 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR500 · 3/4" · curve to 8000 L/min |
|---|---|
| One size down | GAFR400 |
| One size up | GAFR600 (curve to 12000 L/min) |
| Add a lubricator | GAFC500-20 (F.R.L. combination) |
Feed a 3/4in machine header serving multiple pneumatic actuators, where the 8000 L/min envelope (at 0.7 MPa inlet) supports simultaneous operation.
Protect sensitive instruments with the 5 um element, which traps fine particles that could clog precision orifices in control systems.
Supply a multi-station assembly line with stable pressure, while the automatic drain clears condensate without manual intervention.
Choose the GAFR500 for 3/4in lines where a 108 cc drain bowl and 8000 L/min flow envelope (at 0.7 MPa inlet) are needed; the GAFR400 offers a 100 cc bowl and 7000 L/min envelope for a smaller footprint. The nylon bowl is a build choice, while the automatic drain suits unattended operation. This unit includes the mounting bracket but no gauge, so the 1/4in gauge connection is ready for a field-installed unit. The 5 um element traps finer particles than the standard 40 um, and the fitted reverse-flow valve is an ordering difference. For lubrication downstream, order the matching GAFC500-20 combination. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC500-20 combination; do not expect an oil mist from this unit.
The GAFR500N20ASNWTK operates from 0.15 to 0.9 MPa (20-130 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. It works in -5 to 70 C temperatures, has a 108 cc drain bowl, and weighs 950 g.
The 'N' after the port code means no gauge is supplied, allowing you to install your own. The gauge connection on the GAFR500 is 1/4in, so a standard 1/4in gauge can be fitted directly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.