
The AirTAC GAFR Adjustable Filter Regulator GAFR500N20LJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR500N20LJNTK is a filter and regulator combined into a single body, handling both air purification and pressure control in one compact unit. This model has a 3/4in port, a nylon bowl, and a 40 um element, with a lower pressure range of 0.15-0.4 MPa (20-58 psi).
Its diversion structure spins incoming air to separate liquid water and solid particles into the 108 cc drain bowl, while the balanced regulator mechanism holds the outlet steady as supply pressure varies. Weighing 950 g, this unit is built for a 3/4in line and requires proper panel or frame mounting rather than support from tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR500N20LJNTK |
|---|---|
| Series | GAFR500 filter & regulator |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Bracket | Not included (J) |
| Weight | 950 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR500 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR500 | GA500 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC500-20 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR500 · 3/4" · curve to 8000 L/min |
|---|---|
| One size down | GAFR400 |
| One size up | GAFR600 (curve to 12000 L/min) |
| Add a lubricator | GAFC500-20 (F.R.L. combination) |
Feeds a 3/4in header serving multiple pneumatic actuators on a production line, where the lower pressure range protects sensitive equipment and the 108 cc bowl handles condensate between shifts.
Supplies filtered air at a stable lower pressure to spray guns in a booth, where the 40 um element traps particles and the semi-auto drain allows scheduled maintenance.
Powers pneumatic test fixtures on an R&D bench, where the balanced regulator holds set pressure steady and the reverse-flow valve is fitted per the ordering code.
Choose the GAFR500 body for 3/4in lines where a 108 cc condensate bowl and 8000 L/min flow envelope at 0.7 MPa inlet provide ample capacity. The nylon bowl offers a build choice, while the semi-auto plus manual drain requires periodic attention. This L-type model tops out at 0.4 MPa, so verify your system never needs more than that. The J code means no bracket is included, and the N code means no gauge is fitted, though the 1/4in gauge connection is ready for one. The 40 um element suits general shop air, and the K code adds a reverse-flow valve as an ordering difference. If oil is needed downstream, order the matching GAFC500-20 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa regulated top.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC500-20 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/4in port, a 0.15-0.4 MPa (20-58 psi) working range, a 1.0 MPa (145 psi) maximum pressure, and a 1.5 MPa (215 psi) proof pressure. Operating temperature is -5 to 70 C, the drain bowl holds 108 cc, and the unit weighs 950 g.
The N code after the port means no gauge is supplied, though the 1/4in gauge connection is available for adding one later. The J code means the mounting bracket is omitted, so you would use an existing bracket or panel mount. Both codes reduce cost when these features are already present in your setup.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.