
The AirTAC GAFR Adjustable Filter Regulator GAFR500N20LNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR500N20LNT is a filter and pressure regulator combined into a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate components. This unit uses a 3/4in port, a 40 um element, and a nylon condensate bowl with both semi-auto and manual drains fitted.
Its lower-pressure regulator is set for 0.15-0.4 MPa (20-58 psi), and the 950 g body with a 108 cc drain bowl suits it for medium-flow lines where space is tight. The diversion structure spins air to drop liquid water and solid particles into the bowl, keeping downstream equipment protected. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR500N20LNT |
|---|---|
| Series | GAFR500 filter & regulator |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Bracket | Included |
| Weight | 950 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR500 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR500 | GA500 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC500-20 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR500 · 3/4" · curve to 8000 L/min |
|---|---|
| One size down | GAFR400 |
| One size up | GAFR600 (curve to 12000 L/min) |
| Add a lubricator | GAFC500-20 (F.R.L. combination) |
Use the lower 0.15-0.4 MPa band to feed a sensitive pneumatic gauge or a light clamping circuit that must not see higher pressures.
The 3/4in port and 108 cc bowl handle a modest multi-station fixture where frequent draining is acceptable with the manual option.
Replace a separate filter and regulator pair with this single body to reduce joints and rail width on an existing panel.
Choose this GAFR500 when you need a 3/4in port with a lower 0.4 MPa ceiling for delicate circuits. The nylon bowl is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or metal versions, so confirm compatibility for your environment. Both semi-auto and manual drains are included, and the bracket comes with the unit; the no-gauge configuration leaves a 1/4in connection if you add one later. If the line needs oil downstream, order the GAFC500-20 combination instead of expecting this unit to lubricate. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC500-20 combination; do not expect an oil mist from this unit.
It is a filter & regulator with a 3/4in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, and -5 to 70 C temperature range. The nylon drain bowl holds 108 cc, the unit weighs 950 g, and it uses a 40 um element with semi-auto and manual drains.
The N after the port means no gauge is supplied; the 1/4in gauge connection is there if you add one. The L type limits regulation to 0.15-0.4 MPa, so it suits low-pressure circuits but cannot deliver above 0.4 MPa, unlike the standard 0.9 MPa version.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.