
The AirTAC GAFR Adjustable Filter Regulator GAFR600C20ASJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR600C20ASJT is a filter and regulator combined in a single body, eliminating the need for separate units and reducing potential leak points. This 3/4in model handles substantial flows, with its performance curve plotted to 12000 L/min at 0.7 MPa inlet, and the metal bowl holds 205 cc of condensate.
Its standard pressure range is 0.15-0.9 MPa (20-130 psi), and the 40 um element traps solid particles while the diversion structure spins out liquid water. The circular gauge with MPa/psi scale is fitted, and the automatic drain handles condensate without manual intervention. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR600C20ASJT |
|---|---|
| Series | GAFR600 filter & regulator |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Bracket | Not included (J) |
| Weight | 1880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR600 | GA600 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 20 | Port size 3/4". This body offers 20 = 3/4", 25 = 1". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC600-20 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR600 · 3/4" · curve to 12000 L/min |
|---|---|
| One size down | GAFR500 |
| Add a lubricator | GAFC600-20 (F.R.L. combination) |
Feed a multi-station assembly machine header with 3/4in piping, where the 12000 L/min plotted envelope at 0.7 MPa inlet supports several actuators running simultaneously.
Supply clean, regulated air to a CNC machining center's pneumatic clamps and tool changers, with the automatic drain handling moisture from a wet compressor line.
Provide stable pressure to a high-speed conveyor sortation system, where the self-locking knob resists drift from continuous vibration and the large 205 cc bowl extends time between drain checks.
This GAFR600 is the largest body in the series, weighing 1880 g and accepting 3/4in or 1in ports; it is metal-bowl and standard-pressure only. The automatic drain suits unattended operation, while the lack of a bracket (J) means you plan for panel mounting or an existing frame. With a 40 um element and NPT threads, it matches general-purpose machine supply lines. If oil is needed downstream, order the matching GAFC600-20 combination instead. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC600-20 combination; do not expect an oil mist from this unit.
The GAFR600C20ASJT operates from 0.15-0.9 MPa (20-130 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Temperature range is -5 to 70 C. The metal drain bowl holds 205 cc, and the unit weighs 1880 g.
The J code means the mounting bracket is omitted. This is for installations using an existing panel, frame, or machine structure for support. The 1880 g weight means it must be rigidly mounted, not supported by the tubing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.