
The AirTAC GAFR Adjustable Filter Regulator GAFR600C20SJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR600C20SJNWTK is a filter and pressure regulator combined into a single body, eliminating the need for separate components. This 3/4in unit handles a standard 0.15-0.9 MPa (20-130 psi) range and uses a 5 um element to trap fine particles, with a metal bowl for the condensate.
Its 1880 g mass and 205 cc drain bowl indicate a machine-level component, not a small jig accessory. The diversion structure spins incoming air to separate water and solids, while the balanced regulator holds the set outlet pressure steady as supply varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR600C20SJNWTK |
|---|---|
| Series | GAFR600 filter & regulator |
| Port size | 3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Bracket | Not included (J) |
| Weight | 1880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR600 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR600 | GA600 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 20 | Port size 3/4". This body offers 20 = 3/4", 25 = 1". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC600-20 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR600 · 3/4" · curve to 12000 L/min |
|---|---|
| One size down | GAFR500 |
| Add a lubricator | GAFC600-20 (F.R.L. combination) |
Feed a multi-station assembly machine's main header with this 3/4in unit, providing filtered and regulated air to multiple actuators from one point.
Use the 5 um element to protect sensitive pneumatic valves and instruments from fine particulate, ensuring consistent operation in a control cabinet.
Regulate the air supply for a long conveyor system's pneumatic stops and guides, with the large 205 cc bowl reducing drain frequency.
This GAFR600 is the largest body in the series, with a 3/4in port and a flow envelope plotted to 12000 L/min at 0.7 MPa inlet. It is metal-bowl only and standard-pressure only; if you need a lower 0.4 MPa ceiling, step down to a GAFR500 with an L type. The J code means no bracket is included, so plan for panel mounting. The N code means no gauge is fitted, but the 1/4in gauge connection is ready for one. The 5 um element suits precision applications but needs more frequent service than the 40 um standard. The K code adds a reverse-flow (reflux) valve as an ordering difference. For lubrication downstream, order the matching GAFC600-20 combination instead. A 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC600-20 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/4in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 205 cc drain bowl, and weighs 1880 g.
The K code indicates a reverse-flow (reflux) valve is fitted to this GAFR600. It is an ordering difference; the catalogue does not detail its function. This model also has no gauge and no mounting bracket.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.