
The AirTAC GC200-06 FRL Unit (GC20006C3TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC20006C3TK is an AirTAC GC three-unit F.R.L. set: separate air filter, pressure regulator and lubricator handling compressed air only. This size 200 configuration has NPT 1/8 in. ports, the standard 40 um filter element with a differential-pressure drain on the filter bowl, and a reverse (check) valve fitted to block backflow into the supply leg. The regulator uses the external round gauge with a bar scale and adjusts from 0.15 to 0.9 MPa (20 to 130 psi) with the differential-pressure drain; maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The filter and lubricator bowls are polycarbonate (PC) at this size.
This is a genuine AirTAC part. The G series runs from size 200 up to size 600 with ports from 1/8 in. to 1 in., and options include automatic or manual drains, a 5 um filter element, square or round gauges with MPa, psi or bar scales, G (BSPP) or NPT threads and a mounting bracket. Flow is published as curves rather than a single rated figure, so we confirm flow and other datasheet figures on request.
| Model | AirTAC GC200-06 FRL Unit (GC20006C3TK) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the small cylinders and grippers that fold and seal cartons on a packaging line, with the round bar-scale gauge letting operators read line pressure in bar.
Mounted at a workshop bench drop to condition air before hand-held impact drivers and ratchets, so tools receive oil-mist lubrication and a steady set downstream pressure.
Conditions the supply feeding a manifold of solenoid valves on a small material-handling module, with the fitted check valve blocking reverse flow back into the supply leg.
Size 200 is the smallest step in the G series, with a 1/8 in. NPT port; step up to 300 (1/4 in.), 400 (3/8 in.) or 600 (1/2 in.) when the circuit needs more capacity. This set has the standard 40 um element and the differential-pressure drain; automatic (A) and manual (M) drains and the 5 um (W) element can be specified instead. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
The catalogue publishes G-series flow as curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote for this 1/8 in. size. Tell us your line pressure and what you are feeding and we will confirm the flow figures from the datasheet on request before you order.
C3 specifies an external round pressure gauge with a bar scale instead of the standard embedded square gauge, and K means a reverse (check) valve is fitted to prevent backflow. Without K the set has no check valve, and MPa or psi gauge scales are available as options.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.