
The AirTAC GC200-06 FRL Unit (GC20006LC1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC20006LC1T is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator mounted in line in that order. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The medium is compressed air only, with a maximum working pressure of 1.0 MPa (145 psi) and a -5 to 70 C operating window. The 200-size filter and lubricator bowls are polycarbonate.
The G series spans 200/300/400/600 sizes with ports from 1/8 in to 1 in, plus optional 5 um filtration, manual or automatic drains, alternative gauge styles and scales, and G (BSPP) or NPT thread options. Flow is published as performance curves rather than a single rated figure, so we confirm flow and full datasheet details on request before you order.
| Model | AirTAC GC200-06 FRL Unit (GC20006LC1T) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Filtering, regulating at low pressure and oil-misting the air feeding a small air motor that stirs paint or resin in a day tank, keeping the drive lubricated through long batch runs.
One conditioned feed at the MRO bench for impact drivers, ratchets and die grinders, with the MPa gauge read during setup so each tool sees the pressure it was set up for.
Supplying filtered, regulated, lubricated low-pressure air to a laboratory fixture that cycles a small cylinder, keeping scale and moisture out of the motion loop.
Step up from 200 to 300/400/600 when the line needs more flow and larger ports (1/4 in to 1 in). This unit carries the L low-pressure regulator type, so pick the standard type instead if your process is set near the top of the pressure range; we confirm the exact setting band from the datasheet on request. Drain choices for the filter bowl are differential-pressure (fitted here), automatic or manual. Filtration is 40 um as supplied; the W variant gives 5 um for finer protection of downstream valves and cylinders. The gauge here is the round MPa version; square bodies and psi or bar scales are catalogue options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow appears only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes G-series flow as performance curves, not as a single rated number, so no one figure is quoted here. Send us your line pressure, port size and air demand and we will confirm the flow from the datasheet on request before you order.
L marks the low-pressure regulator type, chosen when the downstream process is held at lower set pressures than a standard regulator is tuned for. If your line runs near the top of the pressure range, order the standard type instead; we confirm the exact setting range from the datasheet on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.