verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC200 · F.R.L. Combination (filter + regulator + lubricator)

AirTAC GC200-06 FRL Unit (GC20006MF1T)

The AirTAC GC200-06 FRL Unit (GC20006MF1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/8"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade40 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$71.65 $79.15Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC200-06 drain, gauge and thread option on one page All GC200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GC200-06 FRL Unit (GC20006MF1T)

The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set for compressed air. This GC20006MF1T is the size 200 frame with 1/8 inch NPT ports, a manual-drain filter bowl, the standard 40 um filter element, and a square pressure gauge scaled in MPa. The regulator sets downstream pressure anywhere from 0.05 to 0.9 MPa (7-130 psi), and the lubricator feeds an oil mist to downstream pneumatic equipment.

This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with a choice of three thread types (NPT on this code), differential-pressure, automatic or manual drains, 40 um standard or 5 um fine filtration, and square or round gauges in MPa, psi or bar scales. Flow figures are published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.

AirTAC GC200-06 FRL Unit (GC20006MF1T) Technical Specifications

ModelAirTAC GC200-06 FRL Unit (GC20006MF1T)
SeriesGC200 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/8" (NPT thread)
Filtering grade40 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, MPa scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GC200-06 FRL Unit (GC20006MF1T)

GC200G-series F.R.L. combination, 200 body — sets the port range.
06Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC200 · PT1/8" · 40 µm
One size upGC300
Two-unit equivalentGFC200-06
Build orderFilter → regulator → lubricator

Where the AirTAC GC200-06 FRL Unit (GC20006MF1T) Is Used

factory

General factory air drops

Sits at the point of use on a plant air drop to filter, regulate and lubricate air for a production cell, with the 40 um element handling general-purpose duties and the manual drain emptied during shift-end checks.

build

Workshop air tool benches

Prepares air for impact drivers, ratchets and grinders at a maintenance workshop bench, with the MPa square gauge mounted for easy pressure setting and the lubricator keeping tool motors oiled.

conveyor_belt

Conveyor sorting-actuator supply

Feeds the small pusher and stopper cylinders along a conveyor sorting line, where 1/8 inch NPT connections suit the compact actuators and the regulator holds the setting the line was commissioned at.

Is the AirTAC GC200-06 FRL Unit (GC20006MF1T) the Right Station?

The 1/8 inch NPT ports are the smallest step in the GC range; move up to sizes 300, 400 or 600 when your circuit needs higher flow. The standard 40 um element covers general-purpose air preparation, and the W option gives 5 um fine filtration where needed. Manual drain means scheduled hand-draining of the bowl and pairs with the wider 0.05-0.9 MPa (7-130 psi) regulation window. The F1 code specifies the square gauge in MPa; round gauges and psi or bar scales are alternatives.

Flow for this series is published as curves, not a single rated number, so send us your application details and we will confirm sizing and datasheet figures before you order. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Quick checklist

  • ✓ Body size for your peak flow (PT1/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.

AirTAC GC200-06 FRL Unit (GC20006MF1T) FAQ

AirTAC publishes GC-series flow as performance curves rather than a single rated figure, so there is no one rated flow number to quote. Give us your application details and we will confirm the relevant curve and datasheet figures on request before you order.

F1 specifies the square gauge scaled in MPa, while C1 specifies a round external gauge also scaled in MPa; psi (2) and bar (3) scales are further options. The rest of this code decodes as size 200, 1/8 inch NPT ports, manual drain, standard 40 um filtration and a standard regulator.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GC200-06 FRL Unit (GC20006MF1T)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC20006MF1T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.