
The AirTAC GC200-06 FRL Unit (GC20006MF1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set for compressed air. This GC20006MF1TK is the size 200 frame with 1/8 inch NPT ports, a manual-drain filter bowl, the standard 40 um filter element, a square pressure gauge scaled in MPa, and a reverse (check) valve fitted. The regulator sets downstream pressure anywhere from 0.05 to 0.9 MPa (7-130 psi), and the lubricator feeds an oil mist downstream.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with a choice of three thread types (NPT on this code), differential-pressure, automatic or manual drains, 40 um standard or 5 um fine filtration, square or round gauges in MPa, psi or bar scales, and the K check-valve option shown here. Flow figures are published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
| Model | AirTAC GC200-06 FRL Unit (GC20006MF1TK) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Prepares air for dock-door actuators and small pneumatic lifts at a loading bay, where the fitted check valve guards the circuit and the manual-drain bowl is emptied during scheduled depot checks.
Filters, regulates and lubricates air for a general production cell at the point of use, with the 40 um element for general duties and the reverse valve adding back-flow protection on the drop.
Serves regulated, lubricated outlets at a plant maintenance shop for hand-held air tools, with the MPa square gauge for quick setting and the check-valve option protecting the branch line.
This set mirrors the GC20006MF1 but adds the K reverse (check) valve, so choose it where built-in back-flow protection is wanted. The 40 um element is the standard filtration grade; the W option gives 5 um fine filtration. Manual drain pairs with the wider 0.05-0.9 MPa (7-130 psi) regulation window, and the F1 code specifies the square gauge in MPa. The 1/8 inch NPT ports are the smallest GC step; sizes 300, 400 and 600 cover higher flows.
Flow for this series is published as curves, not a single rated number, so send us your application details and we will confirm sizing and datasheet figures before you order. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
No: AirTAC publishes GC-series flow as performance curves rather than one rated number, so we do not quote a single rated flow. Send us your application conditions and we will confirm the matching curve and full datasheet figures on request before you order.
K fits a reverse (check) valve to the combination. Everything else matches the GC20006MF1: size 200 with 1/8 inch NPT ports, manual drain, standard 40 um element, standard regulator with 0.05-0.9 MPa (7-130 psi) adjustment, and a square MPa gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.