
The AirTAC GC200-06 FRL Unit (GC20006MF1WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
GC20006MF1WT is a genuine AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one set, in size 200 with NPT1/8 ports. This configuration carries a manual drain on the filter bowl, a 5 um filtering element (the W suffix in place of the standard 40 um), and an embedded square pressure gauge reading in MPa. The regulator stage adjusts over 0.05-0.9 MPa (7-130 psi) in this manual-drain version, with a maximum working pressure of 1.0 MPa (145 psi) and a compressed-air medium throughout.
This is a genuine AirTAC part. The GC family is offered in 200, 300, 400 and 600 sizes with a choice of ports, three thread types (NPT on this code), differential-pressure, automatic or manual drains, 40 um or 5 um filtration, and MPa, psi or bar gauge scales. Temperature range is -5 to 70 C (non-freezing) and the 200-size bowls are polycarbonate. AirTAC publishes flow for this series as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
| Model | AirTAC GC200-06 FRL Unit (GC20006MF1WT) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds conditioned air to a small benchtop pick-and-place unit: the 5 um element protects fine control valves from particulates and water, the regulator sets working pressure for the grippers, and the lubricator mists the small cylinders.
Supplies filtered, regulated and lubricated air to a lab test fixture with pneumatic swing clamps, where the manual drain lets an operator bleed accumulated water at the start of each shift.
A point-of-use set at an individual workbench: it cleans, regulates and lubricates the supply feeding air screwdrivers and small ratchets, with the MPa gauge giving a clear local pressure readout.
Size 200 with 1/8" ports is the compact step of the GC range; if your line draws more air, step up to size 300/400/600 for larger ports and flow capacity - match the size and port to the demand rather than the fitting alone. This unit already specifies manual drain, 5 um filtration and a square MPa gauge; if you prefer hands-off water removal, ask for the automatic (A) or differential-pressure (blank) drain variant, and if your panel reads in psi or bar, the gauge scale can be ordered to match. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Because AirTAC publishes flow as curves, not a single rated figure, we cannot quote one rated number here - ask us to confirm sizing against the flow curve for your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote one number on the page. Send us your application details and we will confirm the flow data from the datasheet on request before you order.
The M suffix specifies a manual drain, so an operator opens the drain to expel collected water. If you would rather not rely on routine draining, the same GC200 set is available with an automatic (A) or differential-pressure (blank) drain - tell us which you prefer and we will confirm the corresponding variant and its regulator adjustment range.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.