
The AirTAC GC200-06 FRL Unit (GC20006MF3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
GC20006MF3T is a genuine AirTAC GC-series three-unit F.R.L. combination - separate filter, regulator and lubricator assembled together - in size 200 with NPT1/8 ports. This configuration pairs a manual-drain filter bowl with the standard 40 um filtering element and an embedded square pressure gauge reading in bar, which suits panels and machines labelled in bar. The regulator adjusts over 0.05-0.9 MPa (7-130 psi) in the manual-drain version, with a maximum working pressure of 1.0 MPa (145 psi) on compressed air.
This is a genuine AirTAC part. The GC family is available in 200, 300, 400 and 600 sizes, with three thread types (NPT on this code), differential-pressure, automatic or manual drains, 40 um or 5 um filtration, and MPa, psi or bar gauge scales. Operating temperature is -5 to 70 C (non-freezing) and the 200-size bowls are polycarbonate. Flow figures are published as curves, so we confirm datasheet data on request.
| Model | AirTAC GC200-06 FRL Unit (GC20006MF3T) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds the air cylinders that push cartons on a light conveyor line, providing filtered, regulated and lubricated air with a bar-scale gauge that matches the rest of a European-spec machine panel.
Conditions the supply to a bench-mounted pneumatic assembly press, where the regulator sets ram pressure and the manual drain allows the water collected in the bowl to be bled during shift start-up.
Supplies a small air-knife blow-off station that clears dust and droplets from parts, with the filter and regulator ensuring the blowing air is clean and held at the set pressure.
If your plant instruments read in bar, this MPa-free configuration saves conversion errors at the point of use; MPa and psi gauge scales can be ordered instead. The 40 um element is the standard grade and suits general factory air feeding cylinders and valves; where finer protection is needed, the W variant with a 5 um element is available in the same set. Drain is manual here - choose automatic (A) or differential-pressure (blank) if the unit will be hard to reach. Size 200 with 1/8" NPT ports is the smallest step; move to size 300/400/600 as your flow demand and pipework grow.
Flow is published as curves, not a single rated figure - ask us to confirm sizing for your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the G series as curves rather than a single rated figure, so we do not state a rated number. Tell us the application and we will confirm the relevant flow data from the datasheet on request.
This code carries the standard 40 um element, which suits general-purpose air feeding cylinders and standard valves. The 5 um (W) grade is the choice when downstream equipment needs finer protection from particulates. Both grades are available in the same GC200 set - confirm the grade you need with us before ordering.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.