
The AirTAC GC200-06 FRL Unit (GC20006MNTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator on the same compressed-air line. This GC20006MNTK is the size 200 set with NPT1/8 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. With the manual drain, the regulator setting range is 0.05-0.9 MPa (7-130 psi).
This is a genuine AirTAC part for compressed air, rated up to 1.0 MPa (145 psi) working pressure and -5 to 70 C. The G series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in., plus drain, filter-grade, gauge, reverse-valve and thread (NPT on this code) options. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application on request.
| Model | AirTAC GC200-06 FRL Unit (GC20006MNTK) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Conditions and regulates the pilot air feeding control-valve positioners on a process skid, with the check valve stopping any backflow from the positioner loop toward the supply header.
Runs the single-acting bag-clamp cylinders on a small bagging line, where the check valve prevents exhausted air from being pushed back through the filter-regulator set.
Feeds a local air receiver from the main distribution line, with the reverse valve holding the stored charge in the receiver if the upstream supply is shut off or drops.
Size 200 with 1/8 in. ports is the smallest step in the G series - move up to GC300/400/600 as your circuit grows. Choose this K variant when backflow through the treatment set must be blocked, for example where a downstream volume could push air backwards toward the supply. The manual drain suits an accessible mounting point; take the automatic (A) or differential-pressure (default) drain where nobody passes regularly. The standard element is 40 um and the W suffix gives 5 um. This variant has no gauge (N); gauge versions come with MPa, psi or bar scales. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rated figure, so let us confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes G-series flow as curves, not a single rated figure, so there is no one number to quote. Share your supply pressure, downstream demand and acceptable pressure drop, and we will confirm sizing from the datasheet on request - note that the fitted check valve adds a small pressure loss that we can account for in the check.
K means a reverse (check) valve is fitted in the unit, so air can pass from supply to outlet but not flow back toward the supply side. Order the K variant where a downstream volume or an exhaust path could push air backwards through the set - for example a receiver branch or a circuit with quick-exhaust behavior. The non-K GC20006MN is identical otherwise.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.