
The AirTAC GC200-08 FRL Unit (GC20008C1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator built as one supply set for compressed air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the C1 code adds an external round pressure gauge reading in MPa. Maximum inlet pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing. The 200-size filter bowl is polycarbonate (PC).
This is a genuine AirTAC part offered by airtacdistr.com for the US market. The G series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, plus options for G (BSPP) or NPT threads, automatic, manual or differential-pressure drains, 5 um or 40 um elements, gauges in MPa, psi or bar scales, and a reverse/check valve. Flow for the series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering. Order code GC20008C1T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC200-08 FRL Unit (GC20008C1T) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Filters, regulates and lubricates the air feeding grippers, clamps and cylinders at a manual assembly cell, with the MPa gauge giving operators a clear supply-pressure readout.
Conditions air for the rollers, hold-down cylinders and registration actuators on an offset printing press, where stable regulated pressure matters print-to-print.
Prepares shop air used for bench-testing and servicing trailer tail-lift cylinders and door actuators in a commercial vehicle workshop.
Size 200 with a 1/4 inch port is the common choice for general machine supply points; step up to 300, 400 or 600 when your circuit needs larger ports and greater flow capacity. The differential-pressure drain clears the bowl without daily attention, while automatic (A) and manual (M) drain codes are available. Stay with the 40 um element for general actuation, or choose the W code for a 5 um element where cleaner air is needed. The C1 gauge reads in MPa; square-gauge and psi or bar scale variants exist in the series. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. order the G (BSPP) or T (NPT) variant for other piping. Flow is published as curves, not a single rating, so ask us to confirm sizing against the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote one number here. Tell us your required flow and working pressure and we will confirm the right size from the datasheet before you order.
C is the external round gauge option and 1 is the MPa scale, so this set is built with a round pressure gauge reading in MPa. Square-gauge versions and psi or bar scales are also available in the series if you prefer a different readout.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.