
The AirTAC GC200-08 FRL Unit (GC20008F1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-unit F.R.L. combination, combining a separate air filter, pressure regulator and lubricator in one air-preparation set. This GC20008F1T is the 200 size with 1/4 in NPT ports. The filter removes water and particulate down to 40 um, and its differential-pressure drain clears condensate as the pressure differential builds. The regulator adjusts downstream pressure across 0.15-0.9 MPa (20-130 psi), and the lubricator feeds a controlled oil mist to downstream equipment. An embedded square gauge on an MPa scale is fitted, with maximum working pressure of 1.0 MPa (145 psi) at 5-70 C, non-freezing.
This is a genuine AirTAC part. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves rather than a single rated figure, so share your application details and we will confirm sizing and datasheet figures on request.
| Model | AirTAC GC200-08 FRL Unit (GC20008F1T) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Conditions the supply to the clamp and fold cylinders on a carton-sealing machine, removing condensed water before it reaches the directional valves and regulating the working pressure of each seal stroke.
Feeds the gripper and vacuum-generator circuit of a small pick-and-place module, with the regulator setting gentle grip pressure and the lubricator misting the actuation side of the circuit.
Prepares plant air for the solenoid valves and lift cylinders on weaving machinery, where steady regulated pressure through a shift keeps the motion timing consistent.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. step to 300 or 400 if your flow requirement points that way. The fitted differential-pressure drain suits continuously running lines; manual (M) or automatic (A) drain variants exist for intermittent or unattended duty. The 40 um element is the standard grade for general pneumatics; choose the W version when a 5 um element is called for. This unit's embedded square gauge reads in MPa; psi or bar scales are catalogue alternatives. Flow is published as curves, not one rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC gives G-series flow only as performance curves, not as a single rated figure, so no one number is quoted here. Tell us your supply pressure and the air demand of the equipment you are feeding, and we will confirm sizing against the datasheet curves on request.
The GC20008F1T carries the embedded square gauge with an MPa scale, reading the regulated downstream pressure so operators can verify the setting at a glance. If your site prefers bar or psi, those scales are catalogue alternatives on the same unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.