
The AirTAC GC200-08 FRL Unit (GC20008F1WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, a pressure regulator and a lubricator working together so one assembly cleans the compressed air, holds a set downstream pressure and adds oil mist for air tools and cylinders. This GC20008F1WTK is the 200 size with a 1/4 in NPT port, a differential-pressure drain on the filter bowl, a fine 5 um filter element, an embedded square pressure gauge scaled in MPa, and a reverse (check) valve fitted to hold downstream pressure if the supply drops.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with a choice of ports, threads, drains, filter grades and gauge scales; maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing). The 200-size bowls are polycarbonate (PC). Because published flow data is given as curves rather than a single rating, we confirm flow and datasheet figures for your application on request.
| Model | AirTAC GC200-08 FRL Unit (GC20008F1WTK) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air for the clutch-and-cylinder circuit of a small mechanical punch press, with the check valve holding the set pressure against supply dips.
Conditions the air feeding divert and pusher cylinders on a carton packaging conveyor, keeping moisture and particles out of the directional valves.
Supplies oil-misted air to impact drivers and nutrunners at a bench assembly station, with the regulator set to the tool maker's recommended pressure.
Step up or down through the 200/300/400/600 sizes and their matched ports as your air demand grows - the 200 body with a 1/4 in port suits lighter duty lines, while larger sizes carry more flow at lower pressure drop. Drain choice is yours: differential-pressure (as decoded here), automatic, or manual. The 5 um W element is the finer option over the standard 40 um; keep 40 um for general plant air and step to 5 um where valves and cylinders are more sensitive. The embedded square gauge is included in an MPa scale, with psi and bar scales on other codes in the range. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options you can order.
Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the G series as curves rather than a single rated figure, so no one number would be honest. Tell us your line pressure and air demand and we will confirm the correct size from the datasheet before you order.
K means a reverse (check) valve is fitted. If the upstream supply fails or drops, the valve helps hold the regulated downstream pressure instead of letting the circuit back-flow through the unit - useful on circuits where a momentary collapse would dump a clamp or stop a cycle mid-stroke.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.