
The AirTAC GC200-08 FRL Unit (GC20008F3WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, a pressure regulator and a lubricator working together so one assembly cleans the compressed air, holds a set downstream pressure and adds oil mist for air tools and cylinders. This GC20008F3WT is the 200 size with a 1/4 in NPT port, a differential-pressure drain on the filter bowl, the finer 5 um filter element, and an embedded square pressure gauge scaled in bar. The W code is what moves the filtration from the standard 40 um down to 5 um.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with a choice of ports, threads, drains, filter grades and gauge scales; maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing). The 200-size bowls are polycarbonate (PC). Because published flow data is given as curves rather than a single rating, we confirm flow and datasheet figures for your application on request.
| Model | AirTAC GC200-08 FRL Unit (GC20008F3WT) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeds the pneumatic clamps and ejectors on an electronics assembly fixture, where the 5 um element helps keep fine contaminants away from small control valves.
Supplies cleaner regulated air to low-clearance air jets and bearing pads on a handling station, ahead of any dedicated finer point-of-use filtration.
Conditions the air feeding an industrial robot's gripper valves, combining fine filtration with set pressure and oil mist for long cylinder life.
Step up or down through the 200/300/400/600 sizes and their matched ports as your air demand grows - the 200 body with a 1/4 in port suits lighter duty lines. Drain choice is yours: differential-pressure (as decoded here), automatic, or manual. The 5 um W element decoded here suits more sensitive downstream equipment; drop back to the standard 40 um where only coarse protection is needed. The embedded square gauge is included in a bar scale, with MPa and psi scales on other codes. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options you can order.
Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the G series as curves rather than a single rated figure, so quoting one number would be misleading. Tell us your operating pressure and air demand and we will confirm the sizing from the datasheet before you order.
W selects the 5 um filter element instead of the standard 40 um grade - the finer choice for sensitive valves and actuators. Everything else in this code stays the same: 200 size, 1/4 in NPT port, differential-pressure drain, bar-scale square gauge, and the three-unit filter, regulator and lubricator arrangement.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.