
The AirTAC GC200-08 FRL Unit (GC20008LC2WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC200-08 is a three-piece F.R.L. combination that conditions compressed air in one assembly: a filter removes water and particulate, a regulator holds downstream pressure steady, and a lubricator adds an oil mist for air-powered tools and cylinders. This configuration is the 200 size with a NPT1/4 (1/4 in) port, fitted with the 5 um filter element (code W) for finer filtration than the 40 um standard, a round gauge reading in psi, a reverse/check valve (code K), and a differential-pressure drain on the filter bowl. It is the low-pressure regulator type, and the mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge style and scale, thread (NPT on this code) and reverse valve. Flow is published as curves rather than a single rating, so ask us to confirm the flow or datasheet figures for your application before ordering. Order code GC20008LC2WTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC200-08 FRL Unit (GC20008LC2WTK) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding impact drivers, nutrunners and air ratchets at assembly benches: the filter and lubricator keep the tools fed with clean, oil-misted air while the regulator holds a steady working pressure at each station.
Conditioning the supply to carton sealers, case packers and wrapping machines, where the 5 um element helps protect sensitive valve and cylinder internals and the regulator keeps actuation pressure consistent across the shift.
A point-of-use conditioning station on a maintenance-shop air drop: filtered, regulated and lubricated air for grinders, chisels and pneumatic jacks, with the check valve holding the set-up in line and the bracket for clean panel or frame mounting.
Start with the size and port: 200 is the smallest step in the GC range, and the NPT1/4 port here should match the air line it feeds - step up to 300, 400 or 600 if the line or air demand is larger. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering. This unit carries the 5 um element (W) rather than the 40 um standard - choose 5 um where downstream equipment needs finer air. The differential-pressure drain is the default: it bleeds condensate automatically when the pressure differential across the filter is high enough, with no manual draining routine. The round gauge here reads in psi; square embedded gauges and MPa or bar scales are the other catalogue choices. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Note this is the low-pressure regulator type - confirm the adjustment range suits your line before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so there is no one figure we can quote honestly. Tell us your line pressure and the air demand of the equipment you are feeding, and we will confirm the flow from the datasheet curves for this exact 200-size, 1/4 in unit before you order.
The L in the code marks this as the low-pressure regulator type rather than the standard type, for lines that work at lower pressures than the standard adjustment band covers. The exact adjustment range for the low-pressure GC version is not published in the material we hold, so confirm your required setting with us and we will verify it against the datasheet before ordering.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.