
The AirTAC GC200-08 FRL Unit (GC20008MC1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
GC20008MC1T is a genuine AirTAC G-series three-unit F.R.L. combination consisting of a separate air filter, pressure regulator and lubricator. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
AirTAC offers the GC combination in sizes 200 through 600, so larger ports and flow are available in the same family. We confirm flow and datasheet figures on request before you order.
| Model | AirTAC GC200-08 FRL Unit (GC20008MC1T) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Installed at the outlet of a shop compressor or receiver take-off, giving one filter, one regulated pressure and one lubrication point for the whole downstream bench circuit.
Conditions air for a service vehicle's hose-reel setup powering impact tools and inflate kits, with a manual drain that suits intermittent, attended use.
Supplies a bench used to function-check directional control valves, where the round MPa gauge gives a clear local reading at the set pressure.
Size 200 with 1/4 in NPT ports suits the lower end of the G-series range, with 300 to 600 covering up to 1 in ports on the same platform. The M code specifies a manual drain: you open the bowl drain yourself, which suits serviced or rarely-condensing installations, and note the regulator adjust range for manual-drain sets is 0.05-0.9 MPa (7-130 psi). Filtration is the standard 40 um element for general plant air, and the round external gauge reads in MPa. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow for this series is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a number. Provide your pressure and consumption requirements and we will confirm sizing from the datasheet, including whether 1/4 in size 200 is sufficient or a larger size is needed.
The M code fits a manual bowl drain, so condensate is emptied by opening the drain when servicing instead of venting automatically. The regulator adjust range for manual-drain sets is 0.05-0.9 MPa (7-130 psi), wider at the bottom end than the 0.15-0.9 MPa range of the automatic and differential-pressure drain versions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.