
The AirTAC GC200-08 FRL Unit (GC20008MF2T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
GC20008MF2T is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator in one matched set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter bowl has a manual drain for hand bleeding during maintenance rounds, and the embedded square gauge reads in psi - convenient where your team works to imperial pressure settings.
This is a genuine AirTAC part. The G-series runs from size 200 to 600 with ports from 1/8 to 1 inch, and options include 5 um fine filtration, automatic and differential-pressure drains, MPa, psi or bar gauge scales, G (BSPP) and NPT threads, and a low-pressure regulator type. Because flow is published as curves rather than a single rating, we confirm datasheet figures for your application on request.
| Model | AirTAC GC200-08 FRL Unit (GC20008MF2T) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
A ready conditioning point for the shop-air drop feeding impact wrenches and air ratchets, with the psi gauge matching common US tool pressure settings.
Filters, regulates and lubricates the plant-air feed to carton sealers and wrap stations, keeping the 40 um grade ahead of the machine's valve stack.
Serves as the front-end F.R.L. on a control panel supplying solenoid valves and small actuators on a 1/4 inch circuit.
Choose size 200 with the 1/4 inch port for compact drops feeding hand tools, small cylinders or single machines; step to GC300/400/600 when port size and flow demand grow. This code pairs the 40 um standard element with a manual drain - a sensible fit when the bowl is accessible; pick automatic or differential-pressure drain codes for hard-to-reach installations. The psi-scale square gauge suits US-standard pressure settings.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow for this family is published as curves, not a single rated value, so share your air demand and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes G-series flow as curves, not as one rated figure, so we do not state a number here. Send us your flow and pressure requirements and we will confirm the datasheet curve figures for the size 200 / 1/4 inch combination on request.
Yes. The F2 code gives the embedded square gauge with a psi scale; MPa (F1) and bar (F3) square-gauge versions exist in the same size, and an external round gauge is also a catalogue option on GC sets. Pick the code that matches how your team sets pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.