
The AirTAC GC200-08 FRL Unit (GC20008MLF1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-unit F.R.L. combination: a separate air filter, a pressure regulator and a lubricator assembled as one set, so the compressed air stream is cleaned, regulated and oil-mist lubricated in sequence. This GC200 size is fitted with 1/4 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter and lubricator bowls are polycarbonate on the 200 size.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with 1/8 in. to 1 in. ports, and is offered with your choice of drain type, filter grade, gauge style and scale, and three thread types (NPT on this code). Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm flow and datasheet figures for your application on request. Order code GC20008MLF1T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC200-08 FRL Unit (GC20008MLF1T) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Conditions the air feeding guide rails, stops and gate actuators along a packaging or sorting conveyor, with general-purpose 40 um filtration and lubrication sized for a 1/4 in. branch circuit.
One compact F.R.L. point feeding multiple valve islands and small gripper cylinders on an automation module, with the square MPa gauge built into the regulator face for setpoint checks.
Filters, regulates and lubricates the air supply to dock leveller controls and door actuator circuits at a loading bay, where manual drain suits a scheduled maintenance round.
This code carries the standard 40 um element - a good general-purpose choice for shop air feeding cylinders and valves - with the 5 um W option available where finer filtration is needed. The 200 size with 1/4 in. NPT ports is the compact step in the G series; move to GC300/GC400 for larger ports and higher flow. Drain is manual, so bowl draining is a routine operator task; differential-pressure and automatic drains are available in the same position. The gauge is the embedded square type in MPa scale; the external round gauge and psi/bar scales are catalogue alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
No single rated flow figure exists for this unit in the catalogue - AirTAC publishes flow as performance curves. We will gladly confirm the flow and datasheet figures against your application on request, and advise whether the 200 size or a 300/400 step-up is the right match.
The blank filter-grade position in the code is the standard 40 um element, which suits general shop air feeding cylinders and directional valves. If your equipment needs finer air, order the same set with W in that position (for example GC20008MLF1W) for the 5 um element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.