
The AirTAC GC300-08 FRL Unit (GC30008AC1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC30008AC1T is a genuine AirTAC GC three-unit F.R.L. combination: a separate GF air filter, GR pressure regulator and GL lubricator assembled into one conditioned-air train. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The polycarbonate bowls on the filter and lubricator are rated for compressed air at up to 1.0 MPa (145 psi) inlet and -5 to 70 C, and the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi).
The GC series is offered in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, 40 um standard or 5 um (W) elements, differential-pressure, automatic or manual drains, embedded square or round external gauges scaled in MPa, psi or bar, and three thread types (NPT on this code). AirTAC publishes flow for these units as characteristic curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | AirTAC GC300-08 FRL Unit (GC30008AC1T) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Conditions the air feeding the flap-fold and taping cylinders of a carton sealer on a packaging conveyor, with the automatic drain clearing bowl condensate while the line runs.
Feeds filtered, regulated and lubricated air to the screwdrivers and riveters at a manual assembly bench - the lubricator's oil mist protects the vane motors and the MPa gauge lets operators verify set pressure.
Supplies the swing and edge clamps around a CNC machining cell with regulated air, holding clamp pressure steady as the machine cycles between loading and cutting.
Step the size and port to match demand: this set is 300 at NPT1/4, one step up from the 200 series, and the 400 and 600 sizes carry larger ports for heavier consumption. The drain choices are the differential-pressure default, automatic (coded A here) or manual - a manual-drain set widens the regulator range to 0.05-0.9 MPa (7-130 psi). The element is the 40 um standard; choose 5 um (W) for finer protection. The gauge on this code is round external with an MPa scale; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published as curves rather than one rated number, so share your pressure and flow points and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes GC flow as characteristic curves, not as a single rated figure, so no one l/min value is quoted on this page. Tell us your working pressure and required flow and we will confirm sizing from the datasheet on request.
A is the automatic drain: the filter bowl ejects collected condensate on its own, and the regulator range is 0.15-0.9 MPa (20-130 psi). A manual-drain version of the same set widens the regulator range to 0.05-0.9 MPa (7-130 psi), and the differential-pressure drain is the standard default.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.