
The AirTAC GC300-08 FRL Unit (GC30008ANT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30008ANT is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one set for full compressed-air treatment. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The standard regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with this auto-drain arrangement, and no gauge is fitted (N code) - an external round gauge can be ordered as an option. Working pressure is up to 1.0 MPa (145 psi) and temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing on request.
| Model | AirTAC GC300-08 FRL Unit (GC30008ANT) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
A complete point-of-use treatment set at the wall drop feeding a production cell, covering water and particle removal, pressure setting and cylinder lubrication in one assembly.
Conditions the air driving pick-and-place cylinders and air grippers on an assembly station, with the automatic drain keeping the bowl clear between maintenance rounds.
Feeds impact wrenches and pneumatic tools at a fleet workshop bench, setting working pressure with the regulator and carrying oil mist to the tools through the lubricator.
Size 300 with 08 ports means a 1/4" connection - a sensible step for point-of-use feeds to individual machines; move to 200 for lighter duties or 400/600 where the run demands more. This unit takes the standard 40 um element (fine 5 um is the W option), an automatic drain for filters mounted away from daily reach, and the standard regulator type. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are orderable thread options, and a mounting bracket is optional.
AirTAC publishes GC flow as curves, not one rated number, so ask us to match the curve to your pressure and consumption before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and air consumption and we will confirm the flow curve and datasheet for the GC30008ANT before you order.
The GC combines a separate filter, regulator and lubricator, so each element can be serviced or replaced on its own schedule. A two-unit set folds the filter and regulator into one body; the three-piece GC keeps all three functions distinct with NPT1/4 connections here.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.