
The AirTAC GC300-08 FRL Unit (GC30008C1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC30008C1TK is an AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator installed together to clean, regulate and oil a compressed-air line. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum inlet pressure is 1.0 MPa (145 psi); the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi); working temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and offers differential-pressure, automatic or manual drain, 40 um standard or 5 um filtration, embedded square or external round gauges in MPa, psi or bar scale, a check-valve option, and G (BSPP) or NPT thread options; at size 300 the filter bowl is polycarbonate (PC). Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | AirTAC GC300-08 FRL Unit (GC30008C1TK) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
On robotic end-of-arm tooling serving multiple stations, the FRL keeps gripper cylinders clean, regulated and lubricated, and the fitted check valve covers circuits where reverse flow toward the supply side is unwanted.
Secondary-packaging machines with many cylinders fed from one drop get a single conditioning point; the check valve in this code is specified where the circuit must not push back toward the upstream side.
Welding and fixture cells with banks of clamp cylinders on a shared drop use this unit at the drop inlet, combining filtration, regulation, lubrication and a check valve in one mounting position.
Use the 300 size with 1/4 in NPT ports for mid-range demand on 1/4 in pipework; step to 400 or 600 when the circuit needs larger ports and more flow. The differential-pressure drain fitted here is the catalogue default; automatic (A) or manual (M) drain codes are available. The 40 um element is standard - order the W code for 5 um filtration. The round MPa gauge in this code is the external gauge option; the embedded square gauge is the base, with psi or bar scales on request. The trailing K adds a reverse (check) valve - drop the K if your circuit does not need one. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
Yes - on request. AirTAC publishes GC-series flow as curves rather than a single rated figure, so the honest answer is to match the curve to your application. Send us your flow and pressure conditions and we will confirm from the datasheet before you order.
K specifies that a reverse (check) valve is fitted in the unit. The identical three-unit combination is available without it by omitting the K from the order code. Ask us which position suits your circuit and we will confirm the right code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.