
The AirTAC GC300-08 FRL Unit (GC30008F3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GC30008F3T is AirTAC's three-piece F.R.L. combination in size 300 with NPT1/4 ports: a separate filter, regulator and lubricator conditioning the compressed air supply in one set. The filter carries the standard 40 um element with differential-pressure drainage, the regulator covers 0.15-0.9 MPa (20-130 psi) with this drain type, and the square gauge reads in bar. The 300-size filter and lubricator bowls are polycarbonate. The medium is compressed air only; maximum working pressure is 1.0 MPa (145 psi) and the working temperature is -5 to 70 C, non-freezing.
You are buying a genuine AirTAC part from an authorised distribution channel. The same combination is available in sizes 200, 300, 400 and 600, with ports from 1/8-inch to 1-inch, G (BSPP) or NPT threads, manual or automatic drains, a 5 um W element and MPa or psi gauge scales as catalogue choices. Flow figures are published as curves, so we confirm the datasheet values for your duty on request.
| Model | AirTAC GC300-08 FRL Unit (GC30008F3T) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
A CNC or special-purpose machine's air-operated valves and clamps take conditioned air from this set, with the bar-scaled gauge matching European control-panel conventions.
The label head's cylinders and vacuum ejectors run from one F.R.L. point: filtered and regulated feed with a light oil mist carrying the actuator seals through continuous shifts.
Loom actuation circuits supplied from a local F.R.L. set keep water and particulate out of the machine's pneumatic components while holding a stable working pressure.
Choose the GC size to match the required port and the air demand of the machine: this size 300 set has NPT1/4 ports. With the differential-pressure drain fitted, the regulator adjusts across 0.15-0.9 MPa (20-130 psi); a manual-drain version extends the bottom of the range to 0.05 MPa (7 psi). Filtration here is the standard 40 um element, upgradeable to 5 um with the W suffix. The F3 suffix selects the square gauge with a bar scale (scale 1 = MPa, 2 = psi). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are orderable catalogue options.
Since AirTAC rates the GC series by flow curves rather than a single figure, ask us to check the sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes the GC series flow data as curves instead of a single rated figure, so there is no one number to quote here. Tell us your working pressure and expected air consumption and we will confirm the sizing from the datasheet before you order.
Yes. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Order the port code you need and we will confirm the exact ordering code from the datasheet on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.