
The AirTAC GC300-08 FRL Unit (GC30008MF3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. It removes water and particulate from compressed air, holds a set downstream pressure and meters oil mist into the line.
This is a genuine AirTAC part. Maximum inlet pressure is 1.0 MPa (145 psi); the regulator on this manual-drain set adjusts from 0.05 to 0.9 MPa (7-130 psi); working temperature is -5 to 70 C (non-freezing); the size 300 filter bowl is polycarbonate. The GC family is also offered in sizes 200, 400 and 600, with G (BSPP) or NPT thread options, a 5 um element (W) and a check-valve suffix (K). AirTAC publishes flow as capacity curves rather than one rated figure - ask us and we will confirm the datasheet figures for your application. Order code GC30008MF3T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC300-08 FRL Unit (GC30008MF3T) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Feeds impact wrenches and nutrunners at an assembly bench with the general-purpose 40 um element, a set regulated pressure and an oil mist that keeps the tool motors running.
Serves the cylinders and clamps at a fixed assembly station, giving filtered, regulated, lubricated air at the drop so the station cycles consistently all shift.
Supplies the air balancers and lift-assist cylinders at a loading dock, where the regulator holds the working pressure and the lubricator protects the balancer cylinder seals.
Step through the GC sizes (200/300/400/600) to match the port and air demand of the tools or station being fed; this size 300 set carries 1/4 in NPT ports. Manual drain (M) means the filter bowl must be bled periodically, and the manual-drain regulator covers 0.05-0.9 MPa (7-130 psi). This code keeps the standard 40 um element, right for general-purpose air feeding hand tools and cylinders; the finer 5 um element is the W code instead. The square gauge reads in bar - handy where gauges are read in bar rather than MPa; the MPa-scale version is a separate code. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as capacity curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes F.R.L. capacity as flow curves across pressures and sizes, not as a single rated figure, so we do not state a number here. Tell us your line pressure, set pressure and air consumption and we will confirm the datasheet curve and the right size (200/300/400/600) before you order.
The M code fits a manual drain, so the filter bowl is bled by hand or into a trap at intervals instead of draining itself - automatic-drain versions are separate codes. The F3 code fits the square gauge with a bar scale; if your plant reads pressure in MPa, order the F1 version of the same set.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.