
The AirTAC GC300-08 FRL Unit (GC30008MLNT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
GC30008MLNT is an AirTAC GC three-unit air-treatment combination: a separate air filter, pressure regulator and lubricator piped together. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter bowl has a manual drain and the standard 40 um element; the regulator is the low-pressure type (code L) with a 0.05-0.9 MPa (7-130 psi) setting range for this manual-drain configuration; code N means the set is supplied without a gauge. Maximum working pressure is 1.0 MPa (145 psi), temperature range is -5 to 70 C (non-freezing), and the 300-size filter and lubricator bowls are PC (polycarbonate).
This is a genuine AirTAC part. The GC series spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, and drain, filter grade, gauge, thread and valve options are order choices. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | AirTAC GC300-08 FRL Unit (GC30008MLNT) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
General air supply to a CNC machining center's chip conveyors, tool-change cylinders and air blast: filtered, regulated and lubricated air from a panel where the machine's own pressure display makes a separate gauge redundant.
Feeding dock levellers and shelter cushions on a loading bay: the 40 um element handles typical plant air, the regulator sets actuation pressure, and the manual drain is emptied during scheduled dock checks.
A prepared drop at a maintenance shop bench: one filter-regulator-lubricator set feeding impact tools and test rigs, with pressure read off the shop's existing gauge rather than a dedicated instrument on the set.
Choose the 300 size with 1/4 in NPT ports for compact machine supply lines, or step to 200, 400 or 600 as port and flow demand changes. Drain is manual on this set (widest 0.05-0.9 MPa setting range); automatic and differential-pressure drains are available. The standard 40 um element suits general machine air; specify the W code for 5 um where equipment needs finer air. This N code has no gauge - order the gauge versions (square, or external round, in MPa, psi or bar scales) if operators need to read the setpoint. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating - ask us to confirm sizing before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes G-series flow as curves, not as a single rated figure, so we do not state a rated flow number here. Share your working pressure and consumption and we will confirm the datasheet flow curve for this 300-size set on request.
The 40 um standard grade suits general machine air - cylinders, valves and shop tools. If you feed spray equipment, precision valves or instrumentation, order the W version (GC30008MLNW) with the 5 um element instead. Both share the same 300-size, 1/4 in NPT, manual-drain layout.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.