
The AirTAC GC300-08 FRL Unit (GC30008NT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC30008NT is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, sized 300 with a 1/4 inch NPT port. The filter element is the standard 40 um grade with a differential-pressure drain, the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the max working pressure is 1.0 MPa (145 psi). The N in the code means no gauge is fitted, and the polycarbonate bowls suit -5 to 70 C (non-freezing) compressed air.
This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600 with three thread types (NPT on this code), gauge scales in MPa, psi or bar, and manual or automatic drain variants. Published flow data appears as curves rather than a single rated figure, so we confirm sizing and full datasheet figures on request before you order.
| Model | AirTAC GC300-08 FRL Unit (GC30008NT) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Feeding a spray booth's air line, this F.R.L. set removes water and particulate, holds steady regulator pressure and meters oil mist to keep spray guns running cleanly through a shift.
On a carton-sealing line, the set conditions the supply to clamp and eject cylinders, protecting seals from moisture and keeping actuation pressure consistent.
At a maintenance bench running impact wrenches and air ratchets, the combination filters the shop air, sets tool pressure and lubricates the tools automatically.
Size 300 with a 1/4 inch NPT port is the mid-range step in the G series; if your line draws more air, step up to size 400 (1/2 inch port) or size 600. The differential-pressure drain is the default and suits steady-running supply; a manual or automatic drain (M or A suffix) is available if the install point makes bleeding awkward. The 40 um element is the standard choice; specify the W suffix only if the application needs 5 um filtration.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. a bracket is included, and a gauge with MPa, psi or bar scale can be ordered for these N-code units. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your air consumption before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes flow for the GC series as performance curves, not as a single rated figure, so we do not quote one number. Send us your line pressure and air consumption and we will confirm the sizing and full datasheet figures on request before you order.
The N in the code means no pressure gauge is fitted to the regulator. A gauge is available as an option, with embedded square or external round styles and MPa, psi or bar scales - just ask when ordering.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.