
The AirTAC GC400-15 FRL Unit (GC40015AC1WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC40015AC1WTK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one 3-piece set. This configuration is size 400 with a NPT1/2 (1/2 in) port, automatic drain on the filter bowl, the fine 5 um filter element (W suffix), a round external pressure gauge reading in MPa, and a reverse (check) valve fitted. The regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) and the set carries a bracket. Medium is compressed air only; maximum working pressure is 1.0 MPa (145 psi), and operating temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, in three thread types (NPT on this code), with differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) elements, and the K reverse-valve option. The filter bowl on this 400 size is polycarbonate. Flow is published as curves rather than a single rating; ask us and we will confirm the datasheet and sizing for your application.
| Model | AirTAC GC400-15 FRL Unit (GC40015AC1WTK) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 5 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Prepares air for quarter-turn pneumatic valve actuators on a process skid, where the check valve and 5 um element support a controlled, cleaner actuator supply.
Conditions air for the grippers and cut cylinders on a wire-processing machine, with the fine element guarding precision tooling and the check valve backing the downstream circuit.
Serves a workshop rig that exercises pneumatic trailer-brake components, combining fine filtration, set-point regulation, lubrication and a check valve in one station.
This is the most fully optioned 400-size build here: 1/2 in NPT port, automatic drain, 5 um W element, external round MPa gauge and the K reverse (check) valve. Choose it when you need finer filtration plus a check valve in one conditioning station; drop the W for the standard 40 um element or the K for the plain set. Size 400 with a 1/2 in port covers upper-middle flows in the GC range, with 300 and 600 as neighbouring steps. Embedded square gauges in MPa, psi or bar scales are the alternative gauge choice, and manual or differential-pressure drains are catalogue alternatives to the automatic drain. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. a bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rating, so there is no one rated number to quote. Send us your air demand and we will confirm the datasheet curve for this 400-size, 1/2 in port unit and verify it suits your application before you order.
The K suffix means a reverse (check) valve is fitted. Without it, GC40015AC1W is the same 400-size set with the same 1/2 in NPT port, automatic drain, 5 um element and MPa round gauge. It is a genuine catalogue option on the GC series, so specify it only where your circuit needs it.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.