
The AirTAC GC400-15 FRL Unit (GC40015AC3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC40015AC3T is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set, giving filtration, regulation and lubrication in a single mounting. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The bowls are polycarbonate (PC), and the set includes a mounting bracket.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, G or NPT thread options, manual or differential-pressure drain choices, a 5 um filter grade option, and gauge scale options in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and flow figures for your application on request.
| Model | AirTAC GC400-15 FRL Unit (GC40015AC3T) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated and lubricated air to impact wrenches, nut runners and clamping fixtures along an assembly line, with the automatic drain keeping the filter bowl clear between shifts.
Supplies the pneumatic cylinders and grippers on a packaging or bottling conveyor, where the filter removes water and particulate, the regulator holds a steady working pressure, and the lubricator mists oil for cylinder and valve life.
Prepares the shop-air supply for a CNC machining cell, protecting tool changers, air bearings and clamping circuits from moisture and debris while keeping actuator pressure stable at the machine.
Size and port drive the choice: the 400 size with its NPT1/2 port suits lines running higher air demand than the 200/300 sizes, while the 600 size serves the largest ports and flows. Pick the drain to match maintenance practice: automatic drain (this model) empties the filter bowl without operator attention, manual drain suits attended installations, and differential-pressure drain is the catalogue default. The 40 um element is the standard grade; specify the W code for 5 um where finer particulate removal is needed. Gauge scale is selectable (MPa, psi or bar) and this unit carries a round gauge with a bar scale. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so no single flow number can be quoted here. Contact us with your line pressure and air demand and we will confirm the flow figures from the datasheet for your application on request.
The automatic drain on the filter bowl discharges collected condensate without an operator having to open the drain, which suits unattended or hard-to-reach installations. The alternatives in the series are manual drain and the differential-pressure drain default; all work with the same 40 um standard element (5 um available with the W code).
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.