
The AirTAC GC400-15 FRL Unit (GC40015AF3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and a lubricator supplied as one set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. In service it removes water and particulate from the compressed air, holds a steady downstream pressure adjustable from 0.15 to 0.9 MPa (20 to 130 psi), and meters oil mist to lubricate downstream cylinders, valves and air tools.
This is a genuine AirTAC part. Size 400 bowls are polycarbonate; maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating - ask us and we will confirm the datasheet figures for your application. Order code GC40015AF3T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC400-15 FRL Unit (GC40015AF3T) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Conditions air for gate and stopper cylinders along a bottling hall conveyor, with the automatic drain keeping the bowl clear through continuous production.
Serves the wall drops of a plant maintenance shop feeding grinders, drills and impact tools, with the lubricator delivering oil mist to the tool motors.
Feeds the seal-jaw and clamp cylinders of an open-mouth bagging line, where a stable regulated pressure keeps seal actuation repeatable bag after bag.
Size 400 with 1/2 in NPT ports is the larger mid step of the range; move to 600 for heavier lines or 300/200 for compact ones. The automatic drain empties the filter bowl unattended; choose the manual or differential-pressure drain versions if you prefer a different regime. This unit uses the general-purpose 40 um element, with the finer 5 um grade orderable as the W variant. The square gauge is scaled in bar for metric-style reading, and MPa or psi scales are orderable, as are G and NPT threads and a mounting bracket. Flow is published as curves, not one rated figure, so send us your application details and we will confirm sizing before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a single number. Tell us your operating pressure and air demand and we will confirm the datasheet flow data for this size 400, 1/2 in set on request.
The GC is a three-piece combination - separate filter, regulator and lubricator - so all three functions are covered. If your application needs filter and regulation but no oil mist, a GFR filter regulator is the two-unit alternative; the GC suits lines with cylinders or air tools that benefit from lubrication.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.